- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Ether/PPO
- Polyphenylene Ether, Molded
- Nylene® Naxel™ AX190 PPE (Polyphenylene Ether)
Nylene® Naxel™ AX190 PPE (Polyphenylene Ether)
| Category | Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Molded |
| Manufacturer | Nylene® |
| Trade Name | Naxel™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nylene® Naxel™ AX190 PPE (Polyphenylene Ether).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General Purpose Grade. Properties for dry as molded samples.ALM, Nylene Canada, and Custom Resins are all operting companies of Polymeric Resources Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ASTM D638 |
| Flexural Yield Strength | 55.0 MPa | 7980 psi | ASTM D790 |
| Flexural Modulus | 2.20 GPa | 319 ksi | ASTM D790 |
| Izod Impact, Notched | 3.60 J/cm | 6.74 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 85.0 °C | 185 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Parker Chomerics THERM-A-FORM 1642 Cure-in-Place Potting and Underfill Material
- Sapco 99.7% Aluminum Oxide
- Lubrizol ESTANE® GP85AB Ester Based Thermoplastic Polyurethane
- ExxonMobil Metallyte™ 18MM348 OPP Film
- Abatron AboWeld 8201-14/AboCure 8201-14 Carbon-Filled Electrically Conductive Epoxy Compound
- SABIC Innovative Plastics LNP STAT-KON QEP35M PA6.10
- Special Metals UDIMET® alloy L-605 Co-Cr-W-Ni Alloy
Copyright © lookpolymers.com All Rights Reserved