- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Network Polymers Softflex® 2701T Transparent
Network Polymers Softflex® 2701T Transparent
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Network Polymers |
| Trade Name | Softflex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers Softflex® 2701T Transparent.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Softflex® Thermoplastic Elastomer AlloyInformation provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.994 g/cc | 0.994 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0080 cm/cm @Thickness 3.17 mm |
0.0080 in/in @Thickness 0.125 in |
ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm @Thickness 3.17 mm |
0.0060 in/in @Thickness 0.125 in |
ASTM D955 |
| Melt Flow | 5.0 g/10 min @Load 1.00 kg, Temperature 235 °C |
5.0 g/10 min @Load 2.20 lb, Temperature 455 °F |
Procedure A Condition Q; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 45 - 55 | 45 - 55 | 10 second dwell; ASTM D2240 |
| 48 - 58 | 48 - 58 | Instantaneous; ASTM D2240 | |
| Tensile Strength, Yield | 11.33 MPa | 1643 psi | chs 20 in/min; ASTM D412 |
| Elongation at Break | 873 % | 873 % | ASTM D412 |
| 50% Modulus | 0.00150 GPa | 0.218 ksi | ASTM D412 |
| 100% Modulus | 0.00200 GPa | 0.290 ksi | ASTM D412 |
| 300% Modulus | 0.00340 GPa | 0.493 ksi | ASTM D412 |
| Gardner Impact | 27.0 J @Temperature -30.0 °C |
19.9 ft-lb @Temperature -22.0 °F |
ASTM D5420 |
| Taber Abrasion, mg/1000 Cycles | 0.0589 | 0.0589 | H22 Wheel 1000 g load/1000 cycles; ASTM D3389 |
| Compression Set | 22 % | 22 % | Method B, 22 hours at 25% deflection and 23°C; ASTM D395 |
| 72.5 % @Temperature 70.0 °C |
72.5 % @Temperature 158 °F |
22 hours at 25% deflection; ASTM D395, Method B, | |
| 89.2 % @Temperature 100 °C |
89.2 % @Temperature 212 °F |
22 hours at 25% deflection; ASTM D395, Method B, | |
| Tensile Set | 3.8 % | 3.8 % |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Transmission, Visible | 90 % | 90 % | transparent; thickness not quantified |
Users viewing this material also viewed the following:
- Osprey Metals T15 Tool Steel Powder (Grade 90% - 22)
- Ovation Polymers OpteSTAT™ MB PC 1000 Polycarbonate-based Carbon Nanotube Compound
- Huntsman Araldite XB 4383-1 Brominated Resin
- Kotec Carbotex KG-20F10 Polycarbonate, Wear Resistant, 20% Glass Fiber Reinforced
- LATI Latamid 12 H 90FE03 PA 12, Heat Stabilized
- Techmer ES Electrablend® POM CF15 15% Carbon Filled
- Teknor Apex Monprene® MP-1890UV Thermoplastic Elastomer
- Shin-Etsu Silicones LIMSâ„¢ KE1950-35A/B Elastomer
- DuPont Performance Polymers Delrin® 511P BK402 Acetal Homopolymer
Copyright © lookpolymers.com All Rights Reserved