- HOME
- POLYMER SEARCH
- Thermoplastic
- Polystyrene (PS)
- Styrene/Methyl Methacrylate Copolymer (SMMA)
- Network Polymers MS 175 Styrene Methyl Methacrylate Terpolymer
Network Polymers MS 175 Styrene Methyl Methacrylate Terpolymer
| Category | Polymer , Thermoplastic , Acrylic (PMMA) , Polystyrene (PS) , Styrene/Methyl Methacrylate Copolymer (SMMA) |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers MS 175 Styrene Methyl Methacrylate Terpolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Styrene Methyl Methacrylate TerpolymerInformation provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.03 g/cc | 1.03 g/cc | ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | 24 hours; ASTM D570 |
| Linear Mold Shrinkage | 0.0020 - 0.0060 cm/cm | 0.0020 - 0.0060 in/in | ASTM D955 |
| Melt Flow | 5.5 g/10 min @Load 5.00 kg, Temperature 200 °C |
5.5 g/10 min @Load 11.0 lb, Temperature 392 °F |
Procedure A Condition G; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 69 | 69 | ASTM D2240 |
| Tensile Strength at Break | 25.5 MPa | 3700 psi | chs 2 in/min; ASTM D638 |
| Elongation at Break | 52 % | 52 % | chs 2 in/min; ASTM D638 |
| Flexural Modulus | 1.58 GPa | 229 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
| Izod Impact, Notched | 0.481 J/cm | 0.900 ft-lb/in | 0.125 inch bar; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 78.0 °C | 172 °F | Unannealed/Conditioned 48 hours at 23°C; ASTM D648 |
| Vicat Softening Point | 92.0 °C | 198 °F | ASTM D1525 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Haze | 2.6 % | 2.6 % | ASTM D1003 |
| Transmission, Visible | 89 % | 89 % | ASTM D1003 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP STAT-KON EX01696C PEI (Asia Pacific)
- SABIC Innovative Plastics LNP STAT-KON SE003 PA 12 (Asia Pacific)
- SABIC Innovative Plastics LNP STAT-KON RE007 PA 66
- Teknor Apex Monprene® MP-2564B Thermoplastic Elastomer
- Thermoseal Miliam Mica PPS 300 Laminate
- ExxonMobil LDPE LGA 105 Low Density Polyethylene Resin
- DSM Arnitel® EL250 TPC-ET
- Alliance N-33SH Neodymium Iron Boron Magnetic Material
- Huntsman Araldite GZ 488 V-32 US Bisphenol A Epoxy Solution
Copyright © lookpolymers.com All Rights Reserved