- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE D 4308 BLK
Multibase Multi-Flex® TPE D 4308 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE D 4308 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The moisture content is 0.04%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0118 cm/cm | 0.0118 in/in | ASTM D955 |
| Melt Flow | 5.3 g/10 min | 5.3 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 40.4 | 40.4 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 10.1 MPa | 1460 psi | ASTM D412 |
| Elongation at Break | 310 % | 310 % | ASTM D412 |
| Flexural Modulus | 0.261 GPa | 37.9 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | 81.6 kN/m | 466 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Niche Polymer PA66GF43N Nylon 66, 43% Glass Fiber Filled
- SABIC Innovative Plastics Lexan® FXG173R PC
- GRECO ISOPAK 547SHF ABS Resin
- Lord Adhesives Thermosetâ„¢ MS-330 Silicone Board Level Encapsulant
- SABIC Innovative Plastics Valox® VX4910 ASA+PBT (Europe-Africa-Middle East)
- ExxonMobil LDPE LD 361JD Low Density Polyethylene Resin
- 3M Scotch-Weld™ TL72 Threadlocker Anaerobic Adhesive
- ArcelorMittal FB 450 Hot rolled ferrite-bainite steel
- Oceanchem Group n-Propyl Bromide (NPB)
Copyright © lookpolymers.com All Rights Reserved