- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 6221 CU GRAPHITE
Multibase Multi-Flex® TPE A 6221 CU GRAPHITE
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 6221 CU GRAPHITE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 g/cc | 0.0434 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 62 | 62 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 3.62 MPa | >= 525 psi | ASTM D412 |
| Elongation at Break | >= 506 % | >= 506 % | ASTM D412 |
| Tear Strength | >= 19.6 kN/m | >= 112 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 66 T 40 Polyamide 66, 40% Mineral Filled
- Petroquimica Triunfo Trithene® SX 7012 LDPE - Blow Molding
- Parker Chomerics CHO-BOND 1029 Conductive Adhesive
- SABIC Innovative Plastics Valox® 553U PBT+PC
- Westlake Plastics PES film Made from ULTRASON® E Polyethersulfone Resin
- Dymax EMAX 10006 Voil Coil Assembly Disk Drive Adhesive
- Braskem Flexus® 7200 Cast Film Extrusion Polyethylene
- Aclo Accutech Polypropylene Homopolymer HP0336W10L1 Wollastonite Reinforced
- Arkema Group Orgalloy® LT 5050 Flexible Nylon Alloy (Conditioned)
Copyright © lookpolymers.com All Rights Reserved