Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Momentive Performance Materials TSE3940 Flame Retardant Adhesive Sealant, Gray

Category Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade
Manufacturer Momentive Performance Materials (Former GE Silicones)
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Momentive Performance Materials TSE3940 Flame Retardant Adhesive Sealant, Gray.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
TSE3940 and TSE3941 flame retardant adhesive/sealants are non-flowable, one-component RTVs that cure quickly by reacting with atmospheric moisture forming a soft elastic silicone rubber. These materials incorporate a newly developed crosslinking chemistry and are non-corrosive to metallic substrates. They are particularly well suited for electrical/electronic applications.These products differ in color and flame retardancy; TSE3940 is gray and UL94 V-0 rated, TSE3941 is white and is UL94 V-1 rated. When cured, they retain their elastomeric properties throughout the operating temperature range of -55C to 200C (-67F to 392F).Product Features: Meets the corrosion resistant requirements of MIL-A-46146AFast cure at ambient temperaturesOdor, slight alcoholOutstanding adhesion, including most plasticsOutstanding electrical propertiesResistant to heat, cold, moisture, UV, ozone and chemicalsProduct Benefits: One component, no mixing or de-airing requiredSoft consistency provides protection against mechanical and thermal shockExcellent electrical insulationProtects against moistureVarying viscosities allow thorough coating around complex assemblies (TSE399) and thicker coatings where required i.e., high voltage components (TSE392 & TSE397).Convenient packaging/dispensing tubes or cartridges.GE Silicones became a part of Momentive Performance Materials in 2006.
Physical Properties Metric English Comments
Specific Gravity 1.49 g/cc
1.49 g/cc
Mechanical Properties Metric English Comments
Hardness, Shore A 40
40
Tensile Strength, Ultimate 2.94 MPa
427 psi
Elongation at Break 200 %
200 %
Thermal Properties Metric English Comments
Thermal Conductivity 0.410 W/m-K
2.85 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 200 °C
392 °F
Minimum Service Temperature, Air -55.0 °C
-67.0 °F
Flammability, UL94 V-0
V-0
Electrical Properties Metric English Comments
Volume Resistivity 6.00e+14 ohm-cm
6.00e+14 ohm-cm
Dielectric Constant 4.5

@Frequency 60 Hz
4.5

@Frequency 60 Hz
Dielectric Strength 21.0 kV/mm
533 kV/in
Dissipation Factor 0.050

@Frequency 60 Hz
0.050

@Frequency 60 Hz
Processing Properties Metric English Comments
Cure Time 5.00 min
0.0833 hour
Tack free
Descriptive Properties Value Comments
Color Gray
Consistency Paste
Copyright © lookpolymers.com All Rights Reserved