- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Momentive Performance Materials FRV1106 Red Fluorosilicone Adhesive Sealant, Fuel Resistant Paste
Momentive Performance Materials FRV1106 Red Fluorosilicone Adhesive Sealant, Fuel Resistant Paste
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials FRV1106 Red Fluorosilicone Adhesive Sealant, Fuel Resistant Paste.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part acetoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: For use in contact with fuel, solvents, and chemicals.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.58 g/cc | 0.0571 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 42 | 42 | |
| Tensile Strength, Ultimate | 3.33 MPa | 483 psi | |
| Elongation at Break | 230 % | 230 % | |
| Adhesive Bond Strength | 1.38 MPa | 200 psi | Typical lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 205 °C | 401 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 6.3 @Frequency 1000 Hz |
6.3 @Frequency 1000 Hz |
|
| Dielectric Strength | 13.7 kV/mm | 348 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F |
Users viewing this material also viewed the following:
- Premix Thermoplastics PRETECH Halogen-free Engineering Thermoplastics
- Ineos ABS Lustran® QE 1455/L2, Injection Grade (discontinued **)
- Lanxess Durethan® BKV 15 H3.0 000000 Nylon 6 Copolymer, 15% Glass Fibers
- Special Metals BRIGHTRAY® Alloy S Electrical Resistance Alloy
- Teknor Apex Telcar® OBC 4985A Thermoplastic Elastomer
- Teknor Apex Terraloy™ MB 13000A Thermoplastic Starch + PP
- Toyobo GLAMIDE® TY-791HT 6T-Nylon
- A. Schulman LP479-01 High-Density Polyethylene Homopolymer
- Dow Corning 9601 TEXTILE PRINTING INK
Copyright © lookpolymers.com All Rights Reserved