- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Molded
- LyondellBasell Petrothene® NA247000 Low Density Polyethylene, Injection Molding Grade
LyondellBasell Petrothene® NA247000 Low Density Polyethylene, Injection Molding Grade
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Molded |
| Manufacturer | LyondellBasell (former Equistar) |
| Trade Name | Petrothene® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell Petrothene® NA247000 Low Density Polyethylene, Injection Molding Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ApplicationsPetrothene NA247000 provides a balance of stiffness and tear strength. Typical applications include tamper evident caps and closures.Regulatory StatusNA247000 meets the requirements of the Food and Drug Administration, regulation 21 CFR 177.1520.Processing TechniquesSpecific recommendations for processing NA247000 can only be made when the processing conditions, equipment and end use are known.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.924 g/cc | 0.0334 lb/in³ | ASTM D1505 |
| Melt Flow | 7.5 g/10 min | 7.5 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 48 | 48 | ASTM D2240 |
| Tensile Strength, Yield | 13.6 MPa | 1970 psi | ASTM D638 |
| Elongation at Yield | 13 % | 13 % | ASTM D638 |
| Flexural Modulus | 0.340 GPa | 49.3 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -42.8 °C | -45.0 °F | F<sub>50</sub>; ASTM D746 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| FDA | Yes | Yes |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 163 °C | 325 °F | |
| Middle Barrel Temperature | 177 °C | 350 °F | |
| Front Barrel Temperature | 177 °C | 350 °F | |
| Nozzle Temperature | 177 °C | 350 °F |
Users viewing this material also viewed the following:
- Dow BETADAMP™ 32HT (discontinued **)
- Michelman® Michem® Emulsion 29730 Nonionic polyethylene emulsion
- IRPC Polimaxx Polene 2311KX TA4 Polypropylene Compound
- Solvay MIRATAINE® H2C-HA Surfactant
- Solvay RHODISOLV® PORLARCLEAN Solvent
- Tra-Con Tra-Bond 2110 High Impact Epoxy Staking Compound
- DSM Akulon® K125/A PA6
- ChevronTexaco Supreme SAE 5W-30 Motor Oil
- Arlon 30540R010 0.010" (0.254 mm) Uncured/Unsupported Silicone Rubber on a Release Carrier
Copyright © lookpolymers.com All Rights Reserved