- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, 30% Glass Filled
- LTL Color Compounds ColorFast® PCGF130 Polycarbonate, 30% Glass-Filled
LTL Color Compounds ColorFast® PCGF130 Polycarbonate, 30% Glass-Filled
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, 30% Glass Filled |
| Manufacturer | LTL Color Compounds |
| Trade Name | ColorFast® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LTL Color Compounds ColorFast® PCGF130 Polycarbonate, 30% Glass-Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
30% glass-filled grade polycarbonateAll information provided by LTL Color Compounders, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.43 g/cc | 1.43 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0010 - 0.0030 cm/cm | 0.0010 - 0.0030 in/in | 0.125; ASTM D955 |
| Melt Flow | 5.0 g/10 min @Load 1.20 kg, Temperature 300 °C |
5.0 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 92 | 92 | ASTM D785 |
| Tensile Strength, Yield | 100 MPa | 14500 psi | 2.0 in/min; ASTM D638 |
| Elongation at Break | 2.0 % | 2.0 % | 2.0 in/min; ASTM D638 |
| Flexural Strength | 152 MPa | 22000 psi | 2.0 in/min; ASTM D790 |
| Flexural Modulus | 6.62 GPa | 960 ksi | 2.0 in/min; ASTM D790 |
| Izod Impact, Notched | 1.07 J/cm @Temperature 22.8 °C |
2.00 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 146 °C | 295 °F | Unannealed (0.250"); ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 293 - 316 °C | 560 - 600 °F | |
| Middle Barrel Temperature | 304 - 327 °C | 580 - 620 °F | |
| Front Barrel Temperature | 316 - 338 °C | 600 - 640 °F | |
| Nozzle Temperature | 310 - 332 °C | 590 - 630 °F | |
| Melt Temperature | 316 - 338 °C | 600 - 640 °F | |
| Mold Temperature | 82.2 - 116 °C | 180 - 240 °F | |
| Drying Temperature | 121 °C | 250 °F | |
| Dry Time | 3 - 4 hour | 3 - 4 hour | nominal; maximum drying time of 48 hours |
| Back Pressure | 0.345 - 0.689 MPa | 50.0 - 100 psi | |
| Shot Size | 40 - 60 % | 40 - 60 % | |
| Vent Depth | 0.00254 - 0.00762 cm | 0.00100 - 0.00300 in | |
| Screw Speed | 40 - 70 rpm | 40 - 70 rpm |
Users viewing this material also viewed the following:
- MV Labs PR400 PrCl3·7H2O Praseodymium chloride heptahydrate
- SABIC Innovative Plastics LNP LUBRICOMP DEL34E PC (Asia Pacific)
- KKPC Kuhmo HI 425EP Extrusion Molding HIPS
- SABIC Innovative Plastics LNP Thermotuf VFM53 PA 66
- Von Roll Isola IMI Varnish 1202 Polyester Varnish for Electrical Insulation
- Formosa Plastics Formolene® L62009H Film (Hexene Grade) LLDPE
- ELASTO UK Dryflex® 660600S SEBS Based Material, Semi-Filled Qualities, 60A Hardness, Natural
- Arlon 47573R007 0.0075" (0.190 mm) Cured Rubber with Fiberglass Substrate
- SABIC Innovative Plastics Lexan® HFD1711 PC Copolymer (Asia Pacific)
Copyright © lookpolymers.com All Rights Reserved