- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1193 P (SIS) Linear Triblock Copolymer
Kraton® D1193 P (SIS) Linear Triblock Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1193 P (SIS) Linear Triblock Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified: Kraton D1193 PT - supplied as a dusted dense pelletRegion: Asia Pacific, Europe, Japan, North America, and South AmericaUses: Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen ModificationInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.930 g/cc | 0.930 g/cc | ASTM D4025 |
| Volatiles | <= 0.30 % | <= 0.30 % | KM 04 |
| Viscosity | 400 cP | 400 cP | 25% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 14 g/10 min @Load 5.00 kg, Temperature 200 °C |
14 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.15 - 0.35 % | 0.15 - 0.35 % | Talc; BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 53 @Time 10.0 sec |
53 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 17.9 MPa | 2600 psi | Typical properties determined of film cast from toluene solution; ASTM D412 |
| Elongation at Break | 1200 % | 1200 % | Typical properties of film cast from toluene solution; ASTM D412 |
| 300% Modulus | 0.00255 GPa | 0.370 ksi | Typical properties of film cast from toluene solution.; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 20 % | 20 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Polystyrene | 22.7-25.7%, KM 03 | |
| Total Extractables | <1.2%, KM 05 | |
| Styrene/Rubber Ratio | 24/76 |
Users viewing this material also viewed the following:
- RheTech Products M25P251-01A 25% Mica Reinforced Polypropylene Copolymer, Black
- Chevron Phillips Dynex™ D5081 Enhanced LLDPE Blown Film Resin (discontinued **)
- SABIC Innovative Plastics Cycoloy® CS9610 PC+ABS (Asia Pacific)
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 80A, Non-Black Sulfur Cure
- Teknor Apex Sinvicomp SHE 7500 Polyvinyl Chloride, Flexible
- SABIC Innovative Plastics NORYL PPX PPX630 PPE+PP (Europe-Africa-Middle East)
- SPHERE ONE EXTENDOSPHERESâ„¢ PM 6550 Hollow Plastic Spheres
- Daikin DAI-EL G-716 Fluoroelastomer Copolymer, Bisphenol Curable Grade, 66% Fluorine Content
- E-Polymers TEKANATE® G7013 General Purpose Easy Molding Polycarbonate
- Arlon 920-10Bxx-P0 0.020" Self-Fusing Silicone Rubber Tape
Copyright © lookpolymers.com All Rights Reserved