- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1111 K (SIS) Linear Block Copolymer
Kraton® D1111 K (SIS) Linear Block Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1111 K (SIS) Linear Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified: Kraton D1111 KT - supplied as a dusted porous pelletKraton D1111 KU - supplied as an undusted porous pelletRegion: Asia Pacific, Europe, Japan, North America, and South America Uses: Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen Modification
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.930 g/cc | 0.930 g/cc | ASTM D4025 |
| Volatiles | 0.70 % | 0.70 % | KM 04 |
| Brookfield Viscosity | 750 - 1250 cP @Temperature 25.0 °C |
750 - 1250 cP @Temperature 77.0 °F |
25% Toluene solution; BAM 922 |
| Melt Flow | 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
2.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.25 - 0.45 % | 0.25 - 0.45 % | BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 45 | 45 | 10 seconds. Typical values on polymer compression molded at 150°C (300°F).; ASTM D2240 |
| Tensile Strength, Ultimate | 19.99 MPa | 2899 psi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Elongation at Break | 1200 % | 1200 % | Typical properties based on film cast from toluene solution.; ASTM D412 |
| 300% Modulus | 0.00138 GPa | 0.200 ksi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 18 % | 18 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Polystyrene | 20-24%, KM 03 | |
| Total Extractables | <1.0%, KM 05 | |
| Styrene/Rubber Ratio | 22/78 |
Users viewing this material also viewed the following:
- Michelman® Micryl™ 783 Water resistant coating
- SABIC Innovative Plastics LNP Lubricomp EL004 PEI
- Solvay MACKADET® 40-K Surfactant
- Chase Plastics CP Pryme® PC320GR Polycarbonate (Utility Grade), 20% Glass Fiber Reinforced, Mold Release
- Total PPC M6823MZ Metallocene Isostatic Propylene Polymer
- Esstech X-863-0050 Surface Active Monomer, NTG-GMA, Sodium Salt, C16H20NO5Na
- A.D. Compound Adene NCQAG Copolymer 40% CaCO3 Filled Polypropylene
- Asahi Kasei Leona® 9400S Nylon 66
- ExxonMobil Paxon™ BA53-035 Blow Molding Resin (discontinued **)
Copyright © lookpolymers.com All Rights Reserved