- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- JPJ Technologies PP H35S Homopolymer for Injection Molding
JPJ Technologies PP H35S Homopolymer for Injection Molding
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | JPJ Technologies |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | JPJ Technologies PP H35S Homopolymer for Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PP H35S is specifically developed for producing injection molding articles for general purpose applications. It gives consistent processability and high gloss in the products. Application: General use-Thin wall Miscellaneous, HousewaresInformation provided by JPJ Technologies
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.905 g/cc | 0.0327 lb/in³ | ASTM D792 |
| Melt Flow | 35 g/10 min @Load 2.16 kg, Temperature 230 °C |
35 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
| 1% Secant Modulus | 1500 MPa | 218000 psi | ASTM D790A |
| Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 90.0 °C | 194 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Kazanorgsintez 108-274 Thermostabilized Low Density Polyethylene Composition for Radiation Modification
- Unitika M1030E PA6, Dry
- Teknor Apex Sinvicomp SIH 7005A Polyvinyl Chloride, Flexible
- Chengdu Polyster KP-400 Nucleating Masterbatch Special for PET
- Dow Corning SYL-OFF® 7010 COATING
- DSM Somos® 9110 Epoxy Photopolymer
- ExxonMobil Oppalyte™ 30MW747 OPP Film
Copyright © lookpolymers.com All Rights Reserved