Industeel CLC 18.10 Nb Niobium Stabilized 18Cr-10Ni Austenitic Stainless Steel

Category	Metal , Ferrous Metal , Austenitic , Stainless Steel , T S30000 Series Stainless Steel
Manufacturer	Groupe Arcelor
Trade Name	CLC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Industeel CLC 18.10 Nb Niobium Stabilized 18Cr-10Ni Austenitic Stainless Steel.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

CLC 18-10Nb is a 18Cr-10Ni austenitic stainless steel stabilized with specific Nb addition. This kind of steel is one of the basic grades of the stainless steels range. Niobium bearing and its low carbon content ensure better ductility and avoid the intergranular corrosion, even on welded pieces without ulterior water quenching. Alloys CLC 18-10Nb exhibit austenitic microstructures free of deleterious carbide precipitations at grain boundaries. The grade contain some residual ferrite (~ 3%) after solution annealing (1000-1100Â°C â€“ 1832-2012Â°F) and water quenching. The main properties of CLC 18-10Nb are :basic corrosion resistanceresistance against intergranular corrosionhigh ductilitymedium temperature applicationTensile properties after water quenching.Information provided by manufacturer.

Physical Properties	Metric	English	Comments
Density	7.95 g/cc	0.287 lb/inÂ³

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	520 MPa	75400 psi
Tensile Strength, Yield	>= 200 MPa @Strain 0.200 %	>= 29000 psi @Strain 0.200 %
	>= 240 MPa @Strain 1.00 %	>= 34800 psi @Strain 1.00 %
Elongation at Break	40 %	40 %
Creep Strength	210 MPa @Temperature 600 Â°C, Time 3.60e+6 sec	30500 psi @Temperature 1110 Â°F, Time 1000 hour
Modulus of Elasticity	200 GPa @Temperature 20.0 - 100 Â°C	29000 ksi @Temperature 68.0 - 212 Â°F
Poissons Ratio	0.299	0.299	Calculated
Shear Modulus	77.0 GPa @Temperature 20.0 - 100 Â°C	11200 ksi @Temperature 68.0 - 212 Â°F
Charpy Impact	>= 150 J	>= 111 ft-lb
	225 J	166 ft-lb	Typical
	>= 100 J @Temperature -196 Â°C	>= 73.8 ft-lb @Temperature -321 Â°F
	175 J @Temperature -196 Â°C	129 ft-lb @Temperature -321 Â°F	Typical

Thermal Properties	Metric	English
CTE, linear	16.0 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	8.89 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F
	16.5 Âµm/m-Â°C @Temperature 20.0 - 200 Â°C	9.17 Âµin/in-Â°F @Temperature 68.0 - 392 Â°F
	17.0 Âµm/m-Â°C @Temperature 20.0 - 300 Â°C	9.44 Âµin/in-Â°F @Temperature 68.0 - 572 Â°F
	18.0 Âµm/m-Â°C @Temperature 20.0 - 500 Â°C	10.0 Âµin/in-Â°F @Temperature 68.0 - 932 Â°F
Specific Heat Capacity	0.500 J/g-Â°C @Temperature 20.0 - 100 Â°C	0.120 BTU/lb-Â°F @Temperature 68.0 - 212 Â°F
Thermal Conductivity	15.0 W/m-K @Temperature 20.0 - 100 Â°C	104 BTU-in/hr-ftÂ²-Â°F @Temperature 68.0 - 212 Â°F

Component Elements Properties	Metric	English	Comments
Carbon, C	0.030 %	0.030 %
Chromium, Cr	17.5 %	17.5 %
Iron, Fe	72.27 - 73.03 %	72.27 - 73.03 %	As remainder
Nickel, Ni	9.2 %	9.2 %
Titanium, Ti	0.24 - 1.0 %	0.24 - 1.0 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000730 ohm-cm @Temperature 20.0 - 100 Â°C	0.0000730 ohm-cm @Temperature 68.0 - 212 Â°F

Users viewing this material also viewed the following: