- HOME
- POLYMER SEARCH
- Kaolin Clay
- Imerys KT Cast Slurryâ„¢ Kaolin
Imerys KT Cast Slurryâ„¢ Kaolin
| Category | Ceramic , Clay , Kaolin Clay , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Imerys (Kentucky-Tennessee Clay Co.) |
| Trade Name | KT Cast Slurry™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Imerys KT Cast Slurryâ„¢ Kaolin.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KT Cast Slurry is a carefully controlled kaolin-water suspension formulated for use in ceramic operations.Information provided by Imerys
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.757 g/cc | 1.757 g/cc | as shipped |
| Solids Content | 70 % | 70 % | as shipped |
| Particle Size | 0.50 µm | 0.50 µm | 20% finer than |
| 1.0 µm | 1.0 µm | 39% finer than | |
| 2.0 µm | 2.0 µm | 55% finer than | |
| 5.0 µm | 5.0 µm | 76% finer than | |
| 10 µm | 10 µm | 87% finer than | |
| 20 µm | 20 µm | 96% finer than | |
| Particle Mesh Size | 80 Mesh | 80 Mesh | 0% retained |
| 200 Mesh | 200 Mesh | 1.3% retained | |
| 325 Mesh | 325 Mesh | 3.5% retained | |
| pH | 4.5 - 6.5 | 4.5 - 6.5 | |
| Soluble Sulfates | 175 ppm | 175 ppm | dry weight basis |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 38.8 % | 38.8 % | |
| CaO | 0.090 % | 0.090 % | |
| Fe2O3 | 0.50 % | 0.50 % | |
| K2O | 0.10 % | 0.10 % | |
| Loss on Ignition(%) | 13.7 % | 13.7 % | |
| MgO | 0.030 % | 0.030 % | |
| Na2O | 0.060 % | 0.060 % | |
| SiO2 | 45.1 % | 45.1 % | |
| TiO2 | 1.64 % | 1.64 % |
Users viewing this material also viewed the following:
- Outokumpu SAF 2304® Duplex Stainless Steel
- Samyang Trirex® PC-3022IR 15 MFI Clear Polycarbonate With Release
- Silberline Sparkle Silvet® Premier 838-30-E1
- A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer
- Westlake Epolene® L630-29L Branched Low Density Polyethylene Homopolymer
- Diamond Polymers NPS80-1800B Injection Molding Grade, General Purpose Polystyrene
- 3M 901 Repulpable Forms-Splicing Tape
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 2.0 PHR Thanecure ZM
- Zeon Chemicals Nipol® N917 Nitrile Elastomer
- GEHR Plastics PPE Polyphenylene Ether (discontinued **)
Copyright © lookpolymers.com All Rights Reserved