- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast CURON 145 CC Dense Refractory Castable
Gouda Vuurvast CURON 145 CC Dense Refractory Castable
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | CURON |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast CURON 145 CC Dense Refractory Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: This castable is especially developed for strong, large constructions.Remarks: These values apply to cast products.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.10 - 2.20 g/cc | 0.0759 - 0.0795 lb/in³ | After drying at 110°C |
| Particle Size | <= 10000 µm | <= 10000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 40.0 - 50.0 MPa @Temperature 1300 °C |
5800 - 7250 psi @Temperature 2370 °F |
Cold Crushing Strength |
| 45.0 - 55.0 MPa @Temperature 100 °C |
6530 - 7980 psi @Temperature 212 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.530 - 0.630 W/m-K @Temperature 100 °C |
3.68 - 4.37 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 0.580 - 0.680 W/m-K @Temperature 600 °C |
4.03 - 4.72 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 0.650 - 0.750 W/m-K @Temperature 1300 °C |
4.51 - 5.20 BTU-in/hr-ft²-°F @Temperature 2370 °F |
||
| Maximum Service Temperature, Air | 1450 °C | 2640 °F | |
| Shrinkage | -0.300 - 0.300 % @Temperature 1300 °C |
-0.300 - 0.300 % @Temperature 2370 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 44 % | 44 % | |
| Fe2O3 | <= 2.0 % | <= 2.0 % | |
| SiO2 | 45 % | 45 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| ASTM Classification | C | |
| Material Consumption per 1 m3 | 2100 kg | |
| Mixing Water | 10-13 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Hylar® 460 PVDF Polyvinylidene Fluoride (discontinued **)
- 3M Dyneon™ THV™ 200G Fluorothermoplastic, Pellet Form (discontinued **)
- SABIC Innovative Plastics Valox® IQ507 PBT+PC
- SABIC Innovative Plastics NORYL ENV131 PPE+HIPS (Europe-Africa-Middle East)
- Vyncolit 2923 W Novolac Phenolic
- TPI Porene® AS 121 PC (Blue) General Purpose SAN
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 5.0 PHR Di-Cup 40C Peroxide
- ELASTO UK Dryflex® 602350S SEBS Based Material, Filled Qualities, 35A Hardness, Black
- DuPont Teijin Films Mylar® HP Polyester Film, 36 Gauge
- 3M Pronto™ CA-4 Instant Adhesive
Copyright © lookpolymers.com All Rights Reserved