- HOME
- POLYMER SEARCH
- Carbide
- Gouda Vuurvast CURON 140 K Dense Refractory Silicon Carbide Castable
Gouda Vuurvast CURON 140 K Dense Refractory Silicon Carbide Castable
| Category | Ceramic , Carbide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | CURON |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast CURON 140 K Dense Refractory Silicon Carbide Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
This castable is based on silicon carbide and widely applied as the protective lining for pipes in boilers and incinerators. Curon 140 K has a high thermal conductivity and a good mechanical strength over the whole range of temperatures.Remarks: These values apply to cast products. Also available in gunning variety, marked "GM".Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.30 - 2.40 g/cc | 0.0831 - 0.0867 lb/in³ | After drying at 110°C |
| Particle Size | <= 3000 µm | <= 3000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 35.0 - 45.0 MPa @Temperature 1300 °C |
5080 - 6530 psi @Temperature 2370 °F |
Cold Crushing Strength |
| 45.0 - 55.0 MPa @Temperature 100 °C |
6530 - 7980 psi @Temperature 212 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 3.95 - 4.05 W/m-K @Temperature 100 °C |
27.4 - 28.1 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 4.05 - 4.15 W/m-K @Temperature 600 °C |
28.1 - 28.8 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 4.05 - 4.15 W/m-K @Temperature 1300 °C |
28.1 - 28.8 BTU-in/hr-ft²-°F @Temperature 2370 °F |
||
| Maximum Service Temperature, Air | 1400 °C | 2550 °F | |
| Shrinkage | -0.150 - 0.150 % @Temperature 1300 °C |
-0.150 - 0.150 % @Temperature 2370 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 16 % | 16 % | |
| SiC | 60 % | 60 % | |
| SiO2 | 11 % | 11 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| ASTM Classification | C | |
| Material Consumption per 1 m3 | 2300 kg | |
| Mixing Water | 8-10 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- Nye Lubricants UniFlor 8170R (UF) Synthetic Oil
- SABIC Innovative Plastics Lexan® 123R PC
- Dielectric Polymers NT4500 Protective Film (discontinued **)
- Lucent Polymers PC/ABS-1020 Polycarbonate+ABS, General Purpose, Injection Grade
- SABIC Innovative Plastics LNP LUBRICOMP KL004XXC Acetal Copolymer
- Teknor Apex Sinpolene MBW1702 Low Density Polyethylene
- Lubrizol ESTANE® 58130 Ester Based Thermoplastic Polyurethane
- Braskem FL31 LLDPE Cast Film Extrusion Polyethylene Copolymer
- 3M Scotch-Weld™ 3549 B/A Two-Part Structural Adhesive
- DuPont Performance Polymers Kalrez® 6375 FFKM Perfluoroelastomer
Copyright © lookpolymers.com All Rights Reserved