- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast CURON 13 S Dense Refractory Castable
Gouda Vuurvast CURON 13 S Dense Refractory Castable
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | CURON |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast CURON 13 S Dense Refractory Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Curon 13 S is a spinel based castable with a very low silica content and therefore it is suitable for direct contact with all kinds of aluminum/alloys and fluxes in aluminum melting/holding furnaces and ladles. Due to its unique raw materials, Curon 13 S contains two hydraulic binders and therefore will remain very strong, even at high temperature. Curon 13 S is therefore worldwide used in the aluminum and cement industry.Remarks: These values apply to cast products. Also available in gunning variety, marked "GM".Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.50 - 2.60 g/cc | 0.0903 - 0.0939 lb/in³ | After drying at 110°C |
| Particle Size | <= 7000 µm | <= 7000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 45.0 - 55.0 MPa @Temperature 1000 °C |
6530 - 7980 psi @Temperature 1830 °F |
Cold Crushing Strength |
| 65.0 - 75.0 MPa @Temperature 100 °C |
9430 - 10900 psi @Temperature 212 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.780 - 0.880 W/m-K @Temperature 100 °C |
5.41 - 6.11 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 0.870 - 0.970 W/m-K @Temperature 600 °C |
6.04 - 6.73 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 0.960 - 1.06 W/m-K @Temperature 1000 °C |
6.66 - 7.36 BTU-in/hr-ft²-°F @Temperature 1830 °F |
||
| Maximum Service Temperature, Air | 1300 °C | 2370 °F | |
| Shrinkage | -0.150 - 0.150 % @Temperature 1000 °C |
-0.150 - 0.150 % @Temperature 1830 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 67 % | 67 % | |
| SiO2 | 3.0 % | 3.0 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| ASTM Classification | B | |
| Material Consumption per 1 m3 | 2450 kg | |
| Mixing Water | 8-10 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- Nilit Polynil® P100 Medium Viscosity Nylon 66
- ExxonMobil Santoprene® 121-65W233 Thermoplastic Elastomer (discontinued **)
- LyondellBasell Montell 16501F4 Butene LLDPE
- Solvay RHODOPOL® TG Surfactant
- A. Schulman POLYBATCH™ Red LL50283/3 Concentrate Based In LLDPE
- Eurostar Starflam MX06101 PP, Flame Retardant, Injection Molding
- BCC Products BC 7009-2 Epoxy Casting
- DSM Akulon® K224-PG3 Impact Modified Nylon 6-15% Glass Reinforced (European Grade) (Cond)
- Solvay Specialty Polymers Amodel® EXT-1800 Polyphthalamide, extrusion (discontinued **)
Copyright © lookpolymers.com All Rights Reserved