- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast AK 50 Dense Refractory Brick
Gouda Vuurvast AK 50 Dense Refractory Brick
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast AK 50 Dense Refractory Brick.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: This brick has a low iron and alkali content and is therefore suitable for use in reducing atmospheres at high temperatures. Very good resistance to slag attack. Application: incinerators of chemical waste, cement kilns, anode baking furnaces.Remarks: This data represents average values, obtained from samples that were cut from standard bricks.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.35 g/cc | 0.0849 lb/in³ | Apparent |
| Porosity | 15 % | 15 % | Apparent |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 50.0 MPa | 7250 psi | Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 1.30 W/m-K @Temperature 100 °C |
9.02 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 1.38 W/m-K @Temperature 650 °C |
9.58 BTU-in/hr-ft²-°F @Temperature 1200 °F |
||
| 1.50 W/m-K @Temperature 1100 °C |
10.4 BTU-in/hr-ft²-°F @Temperature 2010 °F |
||
| Maximum Service Temperature, Air | 1500 °C | 2730 °F | |
| 1540 °C | 2800 °F | Deformation under load - t<sub>a</sub> |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 48 % | 48 % | |
| Fe2O3 | <= 1.2 % | <= 1.2 % | |
| SiO2 | 47 % | 47 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Segercone | 35 | |
| Thermal Shock Resistance | 15 cycles | DIN 51068 |
Users viewing this material also viewed the following:
- REXtac Rextac® RT 2730 Amorphous Polyalphaolefin (APAO)
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Carbon Black, N-326 (HS-HAF)
- Momentive Performance Materials N-Sil® RTV128 Silicone Modified Alkoxy Adhesive Sealants, Translucent
- Multibase Dow Corning® MB40-006 Siloxane Additive
- Shuman 710H Utility Black ABS
- A. Schulman POLYFORT™ FPP 1697HU High Flow Fortified Polypropylene
- Master Bond UV10LV One Component, Low Viscosity UV Curable Adhesive
- Diamond Polymers Centrex® 814 General Purpose Injection Molding Grade
- BASF Capron® SEGM35H1 BK-126 15/25% Glass/Mineral-Filled Nylon 6 (Dry) (discontinued **)
- Borealis MG9601 Polyethylene
Copyright © lookpolymers.com All Rights Reserved