- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast AK 46 S Dense Refractory Brick
Gouda Vuurvast AK 46 S Dense Refractory Brick
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | |
| Port | Shanghai port, China |
| Download PDF |
Gouda Vuurvast AK 46 S Dense Refractory Brick.pdf
|
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: AK 46 S is a very dense, high quality firebrick with low iron and alkali content, characterized by a low creep (after 24 hours at 1280°C at a load of 0.2 MPa, the creep is only 0.05% during the last 10 hours). Application: in anode baking furnaces.Remarks: This data represents average values, obtained from samples that were cut from standard bricks.Information provided by Gouda Vuurvast.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.40 g/cc | 0.0867 lb/in³ | Apparent |
| Porosity | <= 15 % | <= 15 % | Apparent |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 50.0 MPa | 7250 psi | Cold Crushing Strength |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity |
1.30
W/m-K <br>@Temperature 100 °C
|
9.02
BTU-in/hr-ft²-°F <br>@Temperature 212 °F
|
|
|
1.38
W/m-K <br>@Temperature 650 °C
|
9.58
BTU-in/hr-ft²-°F <br>@Temperature 1200 °F
|
||
|
1.50
W/m-K <br>@Temperature 1100 °C
|
10.4
BTU-in/hr-ft²-°F <br>@Temperature 2010 °F
|
||
| Maximum Service Temperature, Air | 1500 °C | 2730 °F | |
| 1540 °C | 2800 °F | Deformation under load - t<sub>a</sub> |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| Segercone | 35 | ||
| Thermal Shock Resistance | 15 cycles | DIN 51068 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 48 % | 48 % | |
| Fe2O3 | <= 1.0 % | <= 1.0 % | |
| Na2O or K2O | <= 0.60 % | <= 0.60 % | |
| SiO2 | 49 % | 49 % |
Users viewing this material also viewed:
- LyondellBasell Alathon® H6018 High Density Polyethylene (Extrusion Grade)
- LyondellBasell Petrothene® LP500200 High Density Polyethylene (Sheet & Profile Grade)
- Techmer ES Plastiblend® ABS 8012
- Solvay MACKAMINE® LA Surfactant
- A. Schulman POLYBATCH™ Blue 40567 Concentrate Based In LDPE
- Loctite® 793 Propylene based glycol ether/water Base Surface Primer
- Crucible Steel JIS SUH11 Martensitic Steel
- 3M FM120 Indoor UL Recognized White Polyester Label Products
- Aleris Weldural Aluminum Alloy, 100 mm Thickness
Copyright © lookpolymers.com All Rights Reserved