- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- Global PP-100 General Purpose Polypropylene Homopolymer, Controlled Rheology
Global PP-100 General Purpose Polypropylene Homopolymer, Controlled Rheology
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | Global Polymers Corporation |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Global PP-100 General Purpose Polypropylene Homopolymer, Controlled Rheology.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Global Polymers Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.902 g/cc | 0.0326 lb/in³ | ASTM D1505 |
| Melt Flow | 20 g/10 min @Load 2.16 kg, Temperature 230 °C |
20 g/10 min @Load 4.76 lb, Temperature 446 °F |
L; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 108 | 108 | ASTM D785 |
| Tensile Strength, Yield | 31.7 MPa | 4600 psi | Type 1 Specimen, Rate: 2"/min; ASTM D638 |
| Flexural Modulus | 1.52 GPa | 220 ksi | Tangent; Rate 0.5"/min; ASTM D790 |
| Izod Impact, Notched | 0.214 J/cm | 0.400 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 104 °C | 220 °F | Unannealed; ASTM D648 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 66 T 36 TS PA66, 36% mineral filling
- Indium Corp. Indalloy 243 Tin Solder Alloy
- Styrolution PS 158 N/L GPPS
- A. Schulman PP 1188-01 Polypropylene Extra High-Impact Polypropylene
- Wellman Wellamid® NY1733-GY1 Lubricated, Nucleated, Unfilled Nylon 6
- Chevron Phillips MarFlex® 4517 LDPE Extrusion Coating Resin
- Dow FLEXOMER™ DFDA-1098 NT Very Low Density Polyethylene (VLDPE) Resin
- LATI Latigray 82-05 CX/90 PA 12
Copyright © lookpolymers.com All Rights Reserved