- HOME
- POLYMER SEARCH
- Thermoset
- Polyester, TS
- Thermoset Polyester Glass Filled BMC
- Glastic Laminates/Shapes SG-200 Fiberglass-Reinforced Polyester Rod
Glastic Laminates/Shapes SG-200 Fiberglass-Reinforced Polyester Rod
| Category | Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester Glass Filled BMC |
| Manufacturer | Glastic |
| Trade Name | Laminates/Shapes |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Glastic Laminates/Shapes SG-200 Fiberglass-Reinforced Polyester Rod.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Glastic Corporation.A continuous-filament fiberglass-roving provides superior strength. Excellent thermal endurance - used to replace silicone rod.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.85 g/cc | 0.0668 lb/in³ | ASTM D792 |
| Water Absorption | 0.15 % | 0.15 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 483 MPa | 70100 psi | ASTM D638 |
| Tensile Modulus | 14.0 GPa | 2030 ksi | ASTM D638 |
| Flexural Strength | 552 MPa | 80100 psi | ASTM D790 |
| Flexural Modulus | 21.0 GPa | 3050 ksi | ASTM D790 |
| Compressive Strength | 97.0 MPa | 14100 psi | Transverse; ASTM D695 |
| 345 MPa | 50000 psi | Axial; ASTM D695 | |
| Shear Strength | 21.0 MPa | 3050 psi | In-plane. ASTM D3914 |
| Izod Impact, Notched | 21.4 J/cm | 40.1 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 7.00 µm/m-°C @Temperature 20.0 °C |
3.89 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 210 °C | 410 °F | |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 6.40e+13 ohm | 6.40e+13 ohm | Insulation Resistance, ASTM D257 |
| Dielectric Constant | 5.0 @Frequency 60 Hz |
5.0 @Frequency 60 Hz |
ASTM D150 |
| Dielectric Strength | 3.00 kV/mm | 76.2 kV/in | 1 in. axial in oil; ASTM D149 |
| Arc Resistance | 150 sec | 150 sec | ASTM D495 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® CH6310 PC+ABS (Asia Pacific)
- Kinlead LSS12 Low Temperature Grade Heat Sealable Film (thickness: 20 µm)
- LG Chemical LUCEL N115-LD Anti Mold Deposit POM, Unreinforced, Internally Lubricated, Standard Viscosity
- Indium Corp. Indalloy 88 Indium Solder Alloy
- Shakespeare FL-8 Fluorocarbon PVDF Fishing Line, 17 lb
- SABIC Innovative Plastics LNP THERMOCOMP NX10302 PC+ABS (Asia Pacific)
- Teknor Apex Telcar® TL-2596B Thermoplastic Elastomer
- A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene
- Zircar Ceramics MB Alumina Blanket
Copyright © lookpolymers.com All Rights Reserved