GEHR Plastics PE-UHMW-ELS Polyethylene (discontinued **)

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), UHMW PE Ultra High Molecular Weight
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	GEHR Plastics PE-UHMW-ELS Polyethylene (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Polyethylene offers resistance to almost all acids and bases, detergents and hot water. PE has good insulation properties and is easy to weld. The operating temperature of HDPE is from -58 °F to +194 °F. Main Characteristics: light weight; high chemical resistance; high toughness (also at low temperature); good protection against stress cracking; high elongation; food safe; very good electrical and dielectric properties; soft surface (low tensile strength); HF welding not recommended; very low water absorption • difficult to varnish and glue; low steam permeability; not weather resistantInformation provided by GEHR Plastics, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 1183

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	38.0 MPa	5510 psi	ISO 2039
Tensile Strength at Break	30.0 MPa	4350 psi	ISO 527
Tensile Strength, Yield	17.0 MPa	2470 psi	ISO 527
Elongation at Break	>= 50 %	>= 50 %	ISO 527
Elongation at Yield	8.0 %	8.0 %	ISO 527
Modulus of Elasticity	0.800 GPa	116 ksi	ISO 527
Izod Impact, Unnotched (ISO)	NB	NB	ISO 179
Coefficient of Friction	0.18 @Temperature 60.0 °C	0.18 @Temperature 140 °F

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.400 W/m-K @Temperature 20.0 °C	2.78 BTU-in/hr-ft²-°F @Temperature 68.0 °F	DIN 52612
Maximum Service Temperature, Air	90.0 °C	194 °F
Vicat Softening Point	76.0 °C	169 °F	VST/B/50; ISO 306
Minimum Service Temperature, Air	-150 °C	-238 °F
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+6 ohm-cm	>= 1.00e+6 ohm-cm	VDE 0303
Surface Resistivity per Square	1.00e+7 ohm	1.00e+7 ohm	VDE 0303

Descriptive Properties	Value	Comments
Acid Resistance	Yes
Aromatic Resistance	Limited
Bondability	No
CKW Resistance	No
Hydrocarbonate Resistance	Yes
Hydroxide Resistance	Yes
Ketone Resistance	Yes
Resistance to Hot Water	No
UV Stabilization	Limited

Users viewing this material also viewed the following: