POLYMER SEARCH

Eastman Eastar EN052 Polyester

Category	Polymer , Thermoplastic , Polyester, TP
Manufacturer	Eastman Chemical
Trade Name	Eastar
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Eastman Eastar EN052 Polyester.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Eastar Polyester EN052 is a thermoplastic condensation homopolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized.Applications/UsesGeneral consumer productsOral hygienePersonal care

Physical Properties	Metric	English	Comments
Specific Gravity	1.32 g/cc	1.32 g/cc	ASTM D792
Water Absorption	0.10 %	0.10 %	24h Immersion; ASTM D570
Linear Mold Shrinkage	0.0040 cm/cm @Thickness 3.20 mm	0.0040 in/in @Thickness 0.126 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	110	110	ASTM D785
Tensile Strength at Break	26.0 MPa	3770 psi	ASTM D638
Tensile Strength, Yield	57.0 MPa	8270 psi	ASTM D638
Elongation at Yield	4.0 %	4.0 %	ASTM D638
Flexural Yield Strength	81.0 MPa	11700 psi	ASTM D790
Flexural Modulus	2.50 GPa	363 ksi	ASTM D790
Izod Impact, Notched	0.360 J/cm @Temperature -40.0 °C	0.674 ft-lb/in @Temperature -40.0 °F	ASTM D256
	0.510 J/cm @Temperature 23.0 °C	0.955 ft-lb/in @Temperature 73.4 °F	ASTM D256
Izod Impact, Unnotched	NB	NB	ASTM D4812
	NB @Temperature -40.0 °C	NB @Temperature -40.0 °F	ASTM D4812

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	66.0 °C	151 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	62.0 °C	144 °F	ASTM D648
Vicat Softening Point	79.0 °C	174 °F	1kg load; ASTM D1525

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Surface Resistivity per Square	1.00e+16 ohm	1.00e+16 ohm	ASTM D257
Dielectric Constant	3.0 @Frequency 1e+6 Hz	3.0 @Frequency 1e+6 Hz	ASTM D150
	3.2 @Frequency 1000 Hz	3.2 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	15.7 kV/mm	399 kV/in	Short Time, 500V/sec; ASTM D149
Dissipation Factor	0.0080 @Frequency 1000 Hz	0.0080 @Frequency 1000 Hz	ASTM D150
	0.020 @Frequency 1e+6 Hz	0.020 @Frequency 1e+6 Hz	ASTM D150
Arc Resistance	155 sec	155 sec	ASTM D495

Processing Properties	Metric	English
Melt Temperature	275 - 295 °C	527 - 563 °F
Mold Temperature	10.0 - 30.0 °C	50.0 - 86.0 °F
Drying Temperature	150 - 160 °C	302 - 320 °F
Dry Time	4 - 6 hour	4 - 6 hour

Users viewing this material also viewed the following: