- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength at Break = 26.0 MPa
Polymer Property : Tensile Strength at Break = 26.0 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 2 in/min; ASTM D638 |
| RheTech Products HP531-00 22% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural Applications: IP structural componentsAir ducts - distributionA/B/C/ PillarsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 2 in/min; ASTM D638 |
| RheTech Products HP531-680UV 22% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Medium Scratch Resistant, BJAA Light Parchment Applications: I/P componentsInterior trimA/B/C/ PillarsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO.527 DIN.53455 |
| Omnia Plastica PE 500 - Polyethylene 500 Polyethylene with a molecular weight of ± 500,000. PE 500 is more rigid than the high molecular weight polyethylene and it is therefore more suitable for mechanical applications. The friction coeff.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D412 |
| Polimeri Europa Europrene® SOL T 6414 Styrene - Butadiene Block Copolymer Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene, where bound styrene is 40% weight and diblock content is 22%. .. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D638 |
| Eastman Eastar GN102 Copolyester
(discontinued **) Eastar GN102 copolyester is a glycol modified polyethylene terephthalate (PET) that contains an ultraviolet inhibitor and mold release. Eastar GN102 copolyester will not crystallize and thus offers .. |
|||
| Tensile Strength at Break | <= 26.0 MPa | <= 3770 psi | ISO/R527 |
| Polykemi AB POLYfill PP EIP12030RF Polypropylene/EPDM, Mineral Reinforced Information provided by Polykemi AB |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 0.2 inches/minute; ASTM D 638 |
| NOVA Chemicals Dylark® FG2500 High-Heat Styrenic Copolymer Product Description and Features: Styrenic copolymer with high-heat resistance, high-impact strength and good toughness. Resins used in food grade sheet extrusion and injection molding application.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D638 |
| Petroquimica Triunfo Tritheva® PN 2021 EVA Copolymer The Tritheva® PN 2021 resin is an Ethylene-Vinyl Acetate copolymer (EVA) mainly used for the production of crosslinked/expanded plates and other parts. This is an easy processing product with high .. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 50mm/min; ASTM D638 |
| Kingfa FRHIPS-1162 Flame Retardant Polystyrene Features:UL 94 V-2 @ 1.6mm, V-2 @ 3.2mmExcellent balance properties, high strengthExcellent heat stabilityExcellent electrical propertiesApplications:Injection moldingGas moldingTV & Audio housingEl.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | |
| JPJ Technologies 7800M HDPE Extrusion Information provided by JPJ Technologies |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 50 mm/min; ASTM D638 |
| Lavergne VYSTYRENE PS 3904 High Impact Polystyrene Vystyrene PS 3904 is a black impact modified polystyrene compound with balanced impact/stiffness properties designed for injection molding applicationsFeatures: -High resilience -Excellent process.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 50mm/min; ASTM D638 |
| Kingfa FRHIPS-8002 Flame Retardant Polystyrene Features:UL 94 V-2 @ 1.0mm, V-2 @ 3.2mmExcellent balancing properties, Non-DPOExcellent heat stabilityExcellent electrical propertiesApplications:Injection moldingGas moldingTV and audio housingElec.. |
|||
| Tensile Strength at Break | >= 26.0 MPa | >= 3770 psi | ASTM D638 |
| Solvay Specialty Polymers Hyflon® PFA M620 Perfluoroalkoxy (PFA) Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res.. |
|||
| Tensile Strength at Break | >= 26.0 MPa @Strain >=100 % |
>= 3770 psi @Strain >=100 % |
ISO R527 |
| Shanghai Ofluorine 9202F PVDF Powder for cables Description: Excellent mechanical properties, heat resistance and flame resistance, PVDF for cable can bear high temperature, corrosive chemicals etc harsh working environment, which has low smoke, .. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics Xenoy® X5410 PC+PET (Europe-Africa-Middle East) Mineral filled PC+PET resin with high heat dimensional stability for paint systems. It has very low CTE and excellent flow - impact balance for automotive exterior applications, like body panels, ta.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics LNP Stat-loy AX06484X ABS LNP* Stat-Loy* AX06484 is a compound based on ABS resin containing mineral filler. Characteristics of this grade is it is extrudeable and static dissipative.This data was supplied by SABIC-IP for t.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics Xenoy® X5410 PC+PET Mineral filled PC+PET resin with high heat dimensional stability for paint systems. It has very low CTE and excellent flow - impact balance for automotive exterior applications, like body panels, ta.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D638 |
| SCG Chemicals EL-Leneâ„¢ H5480S High Density Polyethylene Monofilament Key Characteristics:High tenacityExcellent product colorRecommended Applications: Monofilament and flat yarn extrusion for manufacturing of nets, ropes and tarpaulinInformation provided by SCG Chem.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527-2 |
| Tisan TISOPLEN® 30% Calcite Filled Heat Stabilized Copolymer Polypropylene TISOPLEN has a wide area of application in furniture, durable goods, household appliances, electrics/electronics, and telecommunication industries. General specifications include Low densityLow mois.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D638 |
| Eastman Provista NXT Copolymer Resin for Profile Extrusion Applications:Candy packagingCorner guardsDisplays, Fixtures and Point of purchaseFood packagingFurniture guardsIntegrated circuit tubesLighting tubesPlastics for hygiene feminine productsPricing cha.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM D 638 |
| Cossa Polimeri ESTAPROP H 1040 TG Polypropylene, 20% Mineral Filled PP homopolymer 20% mineral fillerGood physical and mechanical characteristics, good processabilityInformation provided by Cossa Polimeri S.r.l. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527-2/50 |
| ExxonMobil Exxtral™ HMU 216 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin characterized by high stiffness and designed for automotive exterior applications in which good surface finish and good UV resistance .. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527-1/-2 |
| DuPont Performance Polymers Hytrel® 4053FG NC010 Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers |
|||
| Tensile Strength at Break | 26.0 MPa @Temperature 23.0 °C |
3770 psi @Temperature 73.4 °F |
ISO 527 (1BA bar) |
| DuPont Performance Polymers Hytrel® 4053FG TPC-ET
(Unverified Data**) Hytrel® 4053FG is a low modulus high performance thermoplastic elastomer with food compliance specificity. It is suitable for extrusion and injection molding processes.Information provided by DuPon.. |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527-1/-2 |
| DuPont Performance Polymers Hytrel® 4056P Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer in Powder FormInformation provided by DuPont Performance Polymers |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527 |
| Breplast Bretene PP Polypropylene Composite Recovered polypropylene compositeInformation provided by Breplast S.p.A. |
|||
| Tensile Strength at Break | >= 26.0 MPa | >= 3770 psi | ASTM D4745-11 |
| Adamas Adalon® 503 PTFE, 0.1% MoS2 Information provided by Adamas, HPM |
|||
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ASTM-D638 |
| Braskem IE59U3 HDPE Injection Molding Polyethylene Homopolymer IE59U3 is a high-density polyethylene, narrow molecular weight homopolymer produced by the solution process for injection molding applications. It offers high stiffness and impact strength, good pro.. |
|||
| Tensile Strength at Break | >= 26.0 MPa @Temperature 23.0 °C |
>= 3770 psi @Temperature 73.4 °F |
ASTM D1708 |
| Solvay Specialty Polymers Hyflon® PFA 420 Perfluoroalkoxy (PFA)
(Unverified Data**) Hyflon® PFA is a family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, .. |
|||
| Tensile Strength at Break | <= 26.0 MPa | <= 3770 psi | ISO/R527 |
| Polykemi AB POLYfill PPH T5060 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Copyright © lookpolymers.com All Rights Reserved