- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Diamond Polymers PC-1900 Polycarbonate
Diamond Polymers PC-1900 Polycarbonate
| Category | Polymer , Thermoplastic , Polycarbonate (PC) |
| Manufacturer | Diamond and Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Diamond Polymers PC-1900 Polycarbonate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in | ASTM D955 |
| Melt Flow | 19 g/10 min @Load 1.20 kg, Temperature 300 °C |
19 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength, Yield | 64.0 MPa | 9280 psi | chs 2.0 in/min; ASTM D638 |
| Flexural Strength | 93.0 MPa | 13500 psi | chs 0.05 in/min; 5% strain; ASTM D790 |
| Flexural Modulus | 2.349 GPa | 340.7 ksi | chs 0.05 in/min; ASTM D790 |
| Izod Impact, Notched | 8.01 J/cm @Thickness 3.17 mm |
15.0 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 128 °C | 262 °F | 0.125";; ASTM D648 |
Users viewing this material also viewed the following:
- Ineos ABS NOVODUR® P2L-AT ABS, Injection Grade (discontinued **)
- Formosa Plastics Formolene® LH5240 Injection Molding HDPE (discontinued **)
- SABIC Innovative Plastics LNP LUBRICOMP RFP36 PA 66 (Europe-Africa-Middle East)
- SABIC Innovative Plastics ULTEM HU2310 PEI (Asia Pacific)
- Sharadaa Ceramics PCF70 Precast Prefired Brick
- Teknor Apex Elexar® EL 3954-70 Thermoplastic Elastomer
- Master Bond EP42-2LV Epoxy Resists Heat and Chemicals
- Arlon 910-07RXX-P0 0.010" (0.254 mm) Self-Fusing Silicone Tape
- Haynes Hastelloy® N, 1.6 mm sheet, heat treated at 1175°C, rapid air cooled
- Arkema Group Oroglas® VS-UVT Acrylic, Injection Molding Grade (discontinued **)
Copyright © lookpolymers.com All Rights Reserved