Category | Polymer , Thermoplastic , Fluoropolymer , PTFE |
Manufacturer | |
Trade Name | |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Dalau Dalcon 001 100% Virgin PTFE.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.13 - 2.19 g/cc | 0.0770 - 0.0791 lb/in³ | BS2782:Pt6 |
Deformation | 7.9 % | 7.9 % | Permanent Deformation; ASTM D621 |
10 % @Time 3600 sec, Pressure 5.00 MPa |
10 % @Time 1.00 hour, Pressure 725 psi |
150°C; ASTM D621 | |
11.8 % @Time 3600 sec, Pressure 14.2 MPa |
11.8 % @Time 1.00 hour, Pressure 2060 psi |
ASTM D621 | |
14.3 % @Pressure 14.2 MPa, Time 86400 sec |
14.3 % @Pressure 2060 psi, Time 24.0 hour |
ASTM D621 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Shore D | 57 - 64 | 57 - 64 | ASTM D2240 |
Tensile Strength | 15.0 - 35.0 MPa | 2180 - 5080 psi | Moulding Direction; BS2782:Pt3 |
Elongation at Break | 150 - 350 % | 150 - 350 % | Moulding Direction; BS2782:Pt3 |
Flexural Modulus | 0.690 GPa | 100 ksi | ASTM D790 |
Compressive Modulus | 0.600 - 0.700 GPa @Strain 0.200 % |
87.0 - 102 ksi @Strain 0.200 % |
ASTM D621 |
Coefficient of Friction, Dynamic | 0.060 | 0.060 | ASTM D1894 |
Coefficient of Friction, Static | 0.080 | 0.080 | ASTM D1894 |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear, Parallel to Flow | 142 µm/m-°C @Temperature 23.0 - 200 °C |
78.9 µin/in-°F @Temperature 73.4 - 392 °F |
ASTM D696 |
CTE, linear, Transverse to Flow | 153 µm/m-°C @Temperature 23.0 - 200 °C |
85.0 µin/in-°F @Temperature 73.4 - 392 °F |
ASTM D696 |
Thermal Conductivity | 0.240 W/m-K | 1.67 BTU-in/hr-ft²-°F | Moulding Direction; ASTM C177 |
Melting Point | 327 °C | 621 °F | ASTM D3417 |
Maximum Service Temperature, Air | 260 °C | 500 °F | |
300 °C | 572 °F | Short Periods | |
Minimum Service Temperature, Air | -200 °C | -328 °F | |
Flash Point | 530 °C | 986 °F | ASTM D1929 |
Oxygen Index | >= 95 % | >= 95 % | ASTM D2863 |
Optical Properties | Metric | English | Comments |
---|---|---|---|
Haze | 80 - 85 % | 80 - 85 % | ASTM D1003 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | ASTM D257 |
Surface Resistance | 1.00e+17 ohm | 1.00e+17 ohm | ASTM D257 |
Dielectric Constant | 2.1 @Frequency 60.0 Hz |
2.1 @Frequency 60.0 Hz |
ASTM D150 |
2.1 @Frequency 1.00e+6 Hz |
2.1 @Frequency 1.00e+6 Hz |
ASTM D150 | |
Dielectric Strength | 24.0 kV/mm | 610 kV/in | Oil(Molding); ASTM D149 |
35.0 kV/mm | 889 kV/in | Oil (Extrusion); ASTM D149 | |
60.0 - 80.0 kV/mm | 1520 - 2030 kV/in | Air (Tape); ASTM D149 | |
Dissipation Factor | <= 0.00030 @Frequency 60.0 Hz |
<= 0.00030 @Frequency 60.0 Hz |
ASTM D150 |
<= 0.00030 @Frequency 1.00e+6 Hz |
<= 0.00030 @Frequency 1.00e+6 Hz |
ASTM D150 |
Descriptive Properties | Value | Comments |
---|---|---|
Color | White |