ChevronTexaco Texcool® P-155

In service Texaco Texcool P 150 provides:Silicate freeExcellent heat transfer propertiesSuperior antifoam characteristicsSuperior corrosion protection for brass, copper, solder, steel and cast ironBorax-free for maximum aluminum protectionNitrite-free, amine-freeMixes readily with clean tap waterCompatible with cooling system filtersCompatible with heavy duty diesel supplemental coolant additives100% biodegradable in its pure unused formTexaco Texcool P 155 is a 50 volume % mixture of Texaco Texcool P 150 and 50 volume % deionized water.Texaco Texcool P 150 is a single phase, propylene glycol based product blended with a premium quality additive package. It is a silicate free coolant designed for use in stationary engines. This product provides antifoam properties, and rust and corrosion protection for brass, copper, solder, steel and cast iron. It mixes readily with clean tap water and is compatible with cooling system filters and supplemental additives.Texaco Texcool P 150 is free of nitrites and amines.Texaco Texcool P 150 is an inhibited propylene glycol used as a heavy duty industrial coolant and heat transfer agent. The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other metals commonly found in industrial cooling and heating systems. A foam inhibitor is included to minimize foaming tendencies during service.Texaco Texcool P 150 coolant is recommended as a coolant in stationary engines, in applications such as natural gas processing, irrigation, power generating systems, oil field operations, and portable air compressors. Texaco Texcool P 150 should not be used in automotive or nonstationary heavy duty diesel applications! Texaco Texcool P 150 coolant protects the cooling system from freezing in winter, overheating in summer, and corrosion in all seasons. Extensive simulated service and actual service tests have proven the effectiveness of Texaco Texcool P 150 coolant in heat transfer applications over the use of brine or uninhibited glycol-water solutions. The results were lower maintenance costs and improved heat transfer with Texaco Texcool P 150.Texaco Texcool P 150 coolant is recommended as a heat transfer fluid for line heaters. A line heater circulates a heated fluid around a pipe to raise the temperature of the pipe content in order to control reactions or ease pumping operations.Texaco Texcool P 150 coolant is recommended as a heat transfer fluid for snow melting systems, loading ramps, walkways, highways, airfield runways, and as a coolant in ice skating rinks and air conditioning systems.Note: These products are not to be used to protect the inside of potable water systems against freezing.Texaco Texcool P 150 meets or exceeds the requirements of:Waukesha stationary enginesCaterpillar stationary enginesCummins stationary enginesTypical test data are average values only. Minor variations which do not affect product performance are to be expected in normal manufacturing.