Chevron Phillips 7120T LLDPE Cast/Blown Resin, Hexene Copolymer (discontinued **)

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips 7120T LLDPE Cast/Blown Resin, Hexene Copolymer (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Resin Type: Hexene CopolymerCharacteristics: Good Stiffness at Thin Gauges, Good Drawdown, Can be used straight or blended with LDPE or HDPEApplications:Stretch Wrap, CoextrusionsProcessing Conditions: Extruder 6.35 cm. Screw L/D Ratio 24:1. Die Opening 0.064 cm.Film properties below based on film thickness of 31.8 µm.Data provided by Chevron Chemical.

Physical Properties	Metric	English	Comments
Density	0.920 g/cc	0.0332 lb/in³	ASTM D1505
Melt Flow	2.0 g/10 min	2.0 g/10 min	Condition E; ASTM D 1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	560 %	560 %	ASTM D882
Film Elongation at Break, TD	720 %	720 %	ASTM D882
Secant Modulus, MD	0.220 GPa	31.9 ksi	ASTM D882
Secant Modulus, TD	0.220 GPa	31.9 ksi	ASTM D882
Elmendorf Tear Strength, MD	17.7 g/micron	450 g/mil	Notched; ASTM D1922
Elmendorf Tear Strength, TD	28.3 g/micron	720 g/mil	ASTM D1922
Dart Drop	3.80 g/micron	96.5 g/mil	F<sub>50</sub>; 1.5 in. dart/26 in. drop height; ASTM D 1709
Film Tensile Strength at Break, MD	46.0 MPa	6670 psi	ASTM D882
Film Tensile Strength at Break, TD	46.0 MPa	6670 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	3.5 %	3.5 %	ASTM D2457
Gloss	136 %	136 %	at 60°. ASTM D 2457

Processing Properties	Metric	English	Comments
Melt Temperature	270 °C	518 °F

Users viewing this material also viewed the following: