Bulk Molding Compounds BMC 1412 Flame and Track Resistant

Category	Polymer , Thermoset , Polyester, TS
Manufacturer	BMC - Bulk Molding Compounds Inc.
Trade Name	BMC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Bulk Molding Compounds BMC 1412 Flame and Track Resistant.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

BMC 1412 is an extremely versatile material. Flame and track resistant, low shrink for close dimensional control and surface smoothness, high physical properties. Developed for injection molding, but also suitable for compression or transfer applications. BMC 1412 is approved for Mil specifications, MAI-30, MAI-60 and MAT-30. UL® recognized. This material was formerly known as Glastic® 1412.

Physical Properties	Metric	English	Comments
Specific Gravity	1.75 - 1.80 g/cc	1.75 - 1.80 g/cc
Water Absorption	0.12 - 0.18 %	0.12 - 0.18 %	24 hours, 23°C
Linear Mold Shrinkage	0.0010 - 0.0030 cm/cm	0.0010 - 0.0030 in/in

Mechanical Properties	Metric	English
Hardness, Barcol	40 - 50	40 - 50
Tensile Strength, Ultimate	41.4 - 48.3 MPa	6000 - 7000 psi
Flexural Strength	159 - 172 MPa	23000 - 25000 psi
Flexural Modulus	13.1 - 13.8 GPa	1900 - 2000 ksi
Compressive Strength	165 - 179 MPa	24000 - 26000 psi
Izod Impact, Notched	4.27 - 4.81 J/cm	8.00 - 9.00 ft-lb/in

Thermal Properties	Metric	English
Deflection Temperature at 1.8 MPa (264 psi)	>= 260 °C	>= 500 °F
UL RTI, Electrical	160 °C	320 °F
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Dielectric Strength	19.3 kV/mm	490 kV/in	Short Time
Dissipation Factor	0.018 @Frequency 60 Hz	0.018 @Frequency 60 Hz	Condition A
	0.023 @Frequency 60 Hz	0.023 @Frequency 60 Hz	Condition A
	0.039 @Frequency 60 Hz	0.039 @Frequency 60 Hz	Condition D
	0.152 @Frequency 60 Hz	0.152 @Frequency 60 Hz	Condition D
Arc Resistance	192 sec	192 sec

Processing Properties	Metric	English	Comments
Mold Temperature	138 - 166 °C	280 - 330 °F

Users viewing this material also viewed the following: