- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Braskem PB608 Injection Molding Low Density Polyethylene
Braskem PB608 Injection Molding Low Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE |
| Manufacturer | Braskem |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem PB608 Injection Molding Low Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Injected lids and caps; Large flat surface injected pieces.Information provided by Braskem.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.915 g/cc | 0.915 g/cc | ASTM D1505/D792 |
| ESCR 10% Igepal® | 15 hour @Temperature 50.0 °C |
15 hour @Temperature 122 °F |
h/50%f; compression molded 2 mm notched-plaques; ASTM D1683 |
| Melt Flow | 30 g/10 min @Load 2.16 kg, Temperature 190 °C |
30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 39 | 39 | ASTM D2240 |
| Tensile Strength at Break | 8.00 MPa | 1160 psi | ASTM D638 |
| Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
| Flexural Modulus, 1% Secant | 450 MPa | 65300 psi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 79.0 °C | 174 °F | ASTM D1525 |
Users viewing this material also viewed the following:
- S&E Specialty Polymers TufTech™ GA-1046HLF PVC Compound
- NOVA Chemicals Novapol® GM-1224-A Butene LLDPE Masterbatch Resin
- Shell Carilon® DB6F5G40 Polyketone, Flame-Retarded (V-0), 20% Glass-Reinforced Injection Molding Grade (disco
- Solvay Specialty Polymers Amodel® A-1340 HS Polyphthalamide (PPA) Resin, 40% Mineral/Glass Reinforced, Dry as Molded &a
- Polymax® Maxelast® C4930 TPE, Transparent
- Lehmann & Voss LUVOCOM® 1105-7709/RD PEEK, unreinforced
- Dow Corning Q1-3563 Release Additive
- EMS-Griltech Griltex® 2A Copolyamide Hotmelt Adhesive (Technical Applications)
- Alliance Polymers Viprene™ P90A-22U-BLK Thermoplastic Vulcanizate Elastomer
Copyright © lookpolymers.com All Rights Reserved