POLYMER SEARCH

Assab Steels ASP 60 Cold Work Steel

Category	Metal , Ferrous Metal , Tool Steel , Cold Work Steel
Manufacturer	Assab Steels
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Assab Steels ASP 60 Cold Work Steel.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

ASP 60 is a W-Mo-V-Co alloyed PM high speed steel characterized by:Highest wear resistanceMaximum compressive strengthGood through hardening propertiesGood toughnessGood dimensional stability on heat treatmentVery good temper resistanceW.-Nr. 1.3241

Physical Properties	Metric	English	Comments
Density	7.89 g/cc	0.285 lb/in³	soft annealed condition
	7.78 g/cc @Temperature 600 °C	0.281 lb/in³ @Temperature 1110 °F	soft annealed condition
	7.83 g/cc @Temperature 400 °C	0.283 lb/in³ @Temperature 752 °F	soft annealed condition

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell C	62	62	Final Hardness after tempering 3 times for one hour at 560°C (1040°F). Austenitizing temperature 960°C (1760°F). ±1 HRC
	64	64	Final Hardness after tempering 3 times for one hour at 560°C (1040°F). Austenitizing temperature 1000°C (1832°F). ±1 HRC
	66	66	Final Hardness after tempering 3 times for one hour at 560°C (1040°F). Austenitizing temperature 1070°C (1960°F). ±1 HRC
	68	68	Final Hardness after tempering 3 times for one hour at 560°C (1040°F). Austenitizing temperature 1150°C (2102°F). ±1 HRC
	69	69	Final Hardness after tempering 3 times for one hour at 560°C (1040°F). Austenitizing temperature 1180°C (2156°F). ±1 HRC
	60.5 @Temperature 500 °C	60.5 @Temperature 932 °F	Hot Hardness. Austenitizing temperature: 1100°C (2010°F).
	62 @Temperature 500 °C	62 @Temperature 932 °F	Hot Hardness. Austenitizing temperature: 1180°C (2160°F).
	65.5 @Temperature 100 °C	65.5 @Temperature 212 °F	Hot Hardness. Austenitizing temperature: 1100°C (2010°F).
	67 @Temperature 100 °C	67 @Temperature 212 °F	Hot Hardness. Austenitizing temperature: 1180°C (2160°F).
	66 @Diameter 5.00 mm	66 @Diameter 0.197 in	Four point bend testing. 5mm/min. Austenitizing temperature: 1050°C Tempering: 3X1 h at 560°C, AC
	68 @Diameter 5.00 mm	68 @Diameter 0.197 in	Four point bend testing. 5mm/min. Austenitizing temperature: 1050°C Tempering: 3X1 h at 560°C, AC
Modulus of Elasticity	250 GPa	36300 ksi
	200 GPa @Temperature 400 °C	29000 ksi @Temperature 752 °F
Flexural Strength	2500 MPa	363000 psi
	3200 MPa	464000 psi
	3500 MPa	508000 psi
	3800 MPa	551000 psi
	4500 MPa	653000 psi

Thermal Properties	Metric	English	Comments
CTE, linear	10.6 µm/m-°C @Temperature 20.0 - 400 °C	5.89 µin/in-°F @Temperature 68.0 - 752 °F	for the hardened and tempered condition
	11.1 µm/m-°C @Temperature 20.0 - 600 °C	6.17 µin/in-°F @Temperature 68.0 - 1110 °F	for the hardened and tempered condition
Specific Heat Capacity	0.418 J/g-°C @Temperature 20.0 °C	0.100 BTU/lb-°F @Temperature 68.0 °F	hardened and tempered condition
	0.502 J/g-°C @Temperature 400 °C	0.120 BTU/lb-°F @Temperature 752 °F	hardened and tempered condition
	0.586 J/g-°C @Temperature 600 °C	0.140 BTU/lb-°F @Temperature 1110 °F	hardened and tempered condition
Thermal Conductivity	21.0 W/m-K @Temperature 20.0 °C	146 BTU-in/hr-ft²-°F @Temperature 68.0 °F	hardened and tempered condition
	24.0 W/m-K @Temperature 600 °C	167 BTU-in/hr-ft²-°F @Temperature 1110 °F	hardened and tempered condition
	25.0 W/m-K @Temperature 400 °C	174 BTU-in/hr-ft²-°F @Temperature 752 °F	hardened and tempered condition

Component Elements Properties	Metric	English
Carbon, C	2.3 %	2.3 %
Chromium, Cr	4.2 %	4.2 %
Cobalt, Co	10.5 %	10.5 %
Iron, Fe	63 %	63 %
Molybdenum, Mo	7.0 %	7.0 %
Tungsten, W	6.5 %	6.5 %
Vanadium, V	6.5 %	6.5 %

Users viewing this material also viewed the following: