- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyether Block Amide (PEBA)
- Arkema Group Pebax® 7033 Polyether Block Amide (PEBA)
Arkema Group Pebax® 7033 Polyether Block Amide (PEBA)
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyether Block Amide (PEBA) |
| Manufacturer | Arkema |
| Trade Name | Pebax® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arkema Group Pebax® 7033 Polyether Block Amide (PEBA).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Arkema Group
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
| Water Absorption | 0.90 % | 0.90 % | 24 hr in water at 20°C; ASTM D570 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | 20°C and 65% RH; ASTM D570 |
| Melt Flow | 6.0 g/10 min | 6.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 69 | 69 | ASTM D2240 |
| Tensile Strength at Break | 52.0 MPa | 7540 psi | ASTM D638 |
| Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
| Elongation at Break | 420 % | 420 % | ASTM D638 |
| Elongation at Yield | 18 % | 18 % | ASTM D638 |
| Flexural Modulus | 0.390 GPa | 56.6 ksi | ASTM D790 |
| Izod Impact, Notched | NB | NB | ASTM D256-A |
| 0.500 J/cm @Temperature -40.0 °C |
0.937 ft-lb/in @Temperature -40.0 °F |
ASTM D256-A | |
| Izod Impact, Unnotched | NB | NB | ASTM D256-A |
| NB @Temperature -40.0 °C |
NB @Temperature -40.0 °F |
ASTM D256-A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Heat of Fusion | 54.0 J/g | 23.2 BTU/lb | ASTM D3417 |
| CTE, linear | 160 µm/m-°C @Temperature -40.0 - 140 °C |
88.9 µin/in-°F @Temperature -40.0 - 284 °F |
ASTM D696 |
| Melting Point | 172 °C | 342 °F | ASTM D3418 |
| Deflection Temperature at 0.46 MPa (66 psi) | 99.0 °C | 210 °F | ASTM D648 |
| Vicat Softening Point | 165 °C | 329 °F | under 1 daN; ASTM D1525 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 4.00e+13 ohm @Temperature 20.0 °C |
4.00e+13 ohm @Temperature 68.0 °F |
65% RH; ASTM D257 |
Users viewing this material also viewed the following:
- Nilit FRIANYL B63 F Raw extruded nylon 6 for injection molding
- Quadrant EPP Nylatron® GS Nylon, Extruded MoS2 Filled Type 66 (ASTM Product Data Sheet)
- Lord Adhesives Versilok® 262B / 254 Acrylic Adhesive
- Loxim 820 01 HBCC Polypropylene Compound, 20% Chemically Coupled, Flame Retardant
- Gwent Electronic Materials C2070508D4 Carbon Graphite Ink
- Lehmann & Voss LUVOCOM® 1105-8389/BL PEEK, with glass fiber
- Sekisui PIOCELAN OP-30DB Moldable Polymer Foam
- Shin-Etsu Silicones X-22-8299 Fluid
- 3M FM0234R2 Clear Polyester Label Products
Copyright © lookpolymers.com All Rights Reserved