Ametek P430L P/M Stainless Steel, Sintered from 7.0 g/cc Green Density

Category	Metal , Ferrous Metal , Stainless Steel , T 400 Series Stainless Steel
Manufacturer	Ametek
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ametek P430L P/M Stainless Steel, Sintered from 7.0 g/cc Green Density.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for 45 minutes. Sintered properties below were determined using transverse rupture bars. Information provided by Ametek Specialty Metal Products.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	520 MPa	75400 psi
Elongation at Break	6.0 %	6.0 %

Component Elements Properties	Metric	English	Comments
Carbon, C	0.020 %	0.020 %
Chromium, Cr	17 %	17 %
Iron, Fe	82 %	82 %	as balance
Manganese, Mn	0.20 %	0.20 %
Phosphorous, P	0.010 %	0.010 %
Silicon, Si	0.90 %	0.90 %
Sulfur, S	0.020 %	0.020 %

Users viewing this material also viewed the following: