Ametek P410L P/M Stainless Steel, Sintered from 6.0 g/cc Green Density

Category	Metal , Ferrous Metal , Stainless Steel , T 400 Series Stainless Steel
Manufacturer	Ametek
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ametek P410L P/M Stainless Steel, Sintered from 6.0 g/cc Green Density.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for 45 minutes. Sintered properties below were determined using transverse rupture bars. Compacting pressure 30 tsi. Green strength 1500 psi. Sintered breaking strength 85 ksi. Dimensional change from die size -0.31%.Information provided by Ametek Specialty Metal Products.

Physical Properties	Metric	English	Comments
Density	6.13 g/cc	0.221 lb/in³

Mechanical Properties	Metric	English
Hardness, Rockwell B	42	42
Tensile Strength, Ultimate	280 MPa	40600 psi
Elongation at Break	3.6 %	3.6 %

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.030 %	<= 0.030 %
Chromium, Cr	11.5 - 13.5 %	11.5 - 13.5 %
Iron, Fe	83.5 - 88.5 %	83.5 - 88.5 %	as balance
Manganese, Mn	<= 2.0 %	<= 2.0 %
Phosphorous, P	<= 0.040 %	<= 0.040 %
Silicon, Si	<= 1.0 %	<= 1.0 %
Sulfur, S	<= 0.030 %	<= 0.030 %

Users viewing this material also viewed the following: