- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- ATG s.r.l. EPM Ethylene-Propylene Copolymer
ATG s.r.l. EPM Ethylene-Propylene Copolymer
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | ATG s.r.l. |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ATG s.r.l. EPM Ethylene-Propylene Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.860 g/cc | 0.860 g/cc |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 40 - 85 | 40 - 85 | |
| Tensile Strength, Ultimate | 6.00 - 18.0 MPa | 870 - 2610 psi | |
| Elongation at Break | 150 - 500 % | 150 - 500 % | |
| Rebound | 35 - 55 % | 35 - 55 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 140 °C | 284 °F | |
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Abrasion Resistance | medium | |
| Chemical Resistance to Animal and Vegetable Oils and Greases | medium | |
| Chemical Resistance to Aromatic Hydrocarbons | none | |
| Chemical Resistance to Chloride Solvents | none | |
| Chemical Resistance to Distilled Water | high | |
| Chemical Resistance to Ketones | high | |
| Chemical Resistance to Maximum Concentrated Alkalis (at 50°C) | high | |
| Chemical Resistance to Medium-High Concentrated Acids (at 50°C) | medium | |
| Chemical Resistance to Mineral Oils and Aliphatic Hydrocarbons | none | |
| Compression set at 100°C | medium | |
| Impermeability at gas (Oxygen and Nitrogen) | low | |
| Resistance to Flame | none | |
| Resistance to Heat Aging | medium | |
| Resistance to Low Temperatures | medium | |
| Resistance to Ozone and Weathering | high | |
| Tear Strength | medium |
Users viewing this material also viewed the following:
- Polymax® Maxelast® A9755 TPE, ABS/PC Overmold
- Omnia Plastica Omniamid PA6 GHR HR - Dry
- Orion Engineered Carbons CORAX® N 330 ASTM Carbon Black
- Alcoa KAMA 3400 Super High Impact Polystyrene (discontinued **)
- IRPC Polimaxx Polene 2300NC Polypropylene Block Copolymer
- Styrolution Luran® S 767KE ASA
- Teknor Apex Uniprene® UN-2467A Thermoplastic Vulcanizate
- EPICHEM Epilon PC UVR Polycarbonate, High Impact
- Chi Mei Polylac® PA-756H ABS - High Flow
- 3M Scotch-Weld™ 2158 B/A Epoxy Adhesive
Copyright © lookpolymers.com All Rights Reserved