POLYMER SEARCH

AGY ADVANTEX® Generic Glass Fiber

Category	Ceramic , Glass , Glass Fiber , Oxide , Silicon Oxide , Other Engineering Material , Composite Fibers
Manufacturer	AGY Holding Corp.
Trade Name	ADVANTEX®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	AGY ADVANTEX® Generic Glass Fiber.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OC/AGY E-CR glass. Various silanes and starch oil are used as binders. Acid resistant. Lower alkali resistance than VeTron® and ZenTron® glass fibers.Information provided by AGY Holding Corp.

Physical Properties	Metric	English	Comments
Density	2.624 g/cc	0.09480 lb/in³
Water Absorption	0.00 %	0.00 %
Loss On Ignition	0.50 - 1.5 %	0.50 - 1.5 %	Varies according to size type
Filament Diameter	9.0 - 30 µm	9.0 - 30 µm

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	2450 MPa @Temperature 371 °C	355000 psi @Temperature 700 °F
	3200 - 3750 MPa @Temperature 23.0 °C	464000 - 544000 psi @Temperature 73.4 °F
Elongation at Break	4.5 %	4.5 %	in 50 mm
Modulus of Elasticity	80.0 GPa	11600 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	5.80 µm/m-°C @Temperature -30.0 - 300 °C	3.22 µin/in-°F @Temperature -22.0 - 572 °F	average, isotropic
Specific Heat Capacity	0.970 J/g-°C @Temperature 200 °C	0.232 BTU/lb-°F @Temperature 392 °F
Melting Point	1171 °C	2140 °F	Liquidus
Liquidus	1171 °C	2140 °F
Maximum Service Temperature, Air	740 °C	1360 °F
Maximum Service Temperature, Inert	740 °C	1360 °F
Transformation Temperature, Tg	750 °C	1380 °F
Softening Point	916 °C	1680 °F

Optical Properties	Metric	English	Comments
Refractive Index	1.56	1.56

Electrical Properties	Metric	English
Electrical Resistivity	3.84e+14 ohm-cm	3.84e+14 ohm-cm
Dielectric Constant	7.2 @Frequency 1000 Hz	7.2 @Frequency 1000 Hz
	7.5 @Frequency 1e+10 Hz	7.5 @Frequency 1e+10 Hz
Dielectric Strength	10.0 kV/mm	254 kV/in
Dissipation Factor	0.0028	0.0028

Users viewing this material also viewed the following: