3M Dyneon™ THV™ 200G Fluorothermoplastic, Pellet Form (discontinued **)

Category	Polymer , Thermoplastic , Fluoropolymer
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M Dyneon™ THV™ 200G Fluorothermoplastic, Pellet Form (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Data provided by the manufacturer, Dyneon LLC.This unique, melt-processable, tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) terpolymer provides a unique combination of performance and processing advantages. Its thermal decomposition in air (TGA) is 420°C. It is recommended for film, tube, and profile extrusion, wire coating, and blow and injection molding.

Physical Properties	Metric	English	Comments
Density	1.95 g/cc	0.0704 lb/in³
Melt Flow	20 g/10 min @Load 5.00 kg, Temperature 260 °C	20 g/10 min @Load 11.0 lb, Temperature 500 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	44	44	ASTM D2240
Tensile Strength, Ultimate	24.1 MPa	3500 psi	Measured on extruded film, ASTM D638
Elongation at Break	600 %	600 %	Measured on extruded film, ASTM D638
Flexural Modulus	0.0830 GPa	12.0 ksi	ASTM D790

Thermal Properties	Metric	English	Comments
Melting Point	115 - 257 °C	239 - 495 °F	ASTM D3418
Maximum Service Temperature, Air	>= 150 °C	>= 302 °F	E-beam cured high temperature resistance.

Electrical Properties	Metric	English	Comments
Dielectric Constant	4.6 @Frequency 1e+7 Hz	4.6 @Frequency 1e+7 Hz
	6.6 @Frequency 100000 Hz	6.6 @Frequency 100000 Hz

Users viewing this material also viewed the following: