3M Dyneon™ TFE 90Z Peroxide Cure Perfluoroelastomer

Category	Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE)
Manufacturer	3M Dyneon™
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M Dyneon™ TFE 90Z Peroxide Cure Perfluoroelastomer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

3M™ Dyneon™ Peroxide Cure Perfluoroelastomer PFE 90Z is a technically advanced peroxide curable perfluoroelastomer, designed to meet the challenges of demanding sealing applications. It is classified as FFKM per ASTM D1418. Its fully fluorinated back bone structure provides a very broad chemical and thermal stability.Features and Benefits:Ideal for wet chemical, fluid handling, cleaning and chemical etching processes for CPI and aerospaceGood compression set resistanceUpper use temperature of 220°CPeroxide curable FFKMLow metal ion content with low extractables in a wide range of chemicalsInformation provided by the Dyneon division of 3M.

Physical Properties	Metric	English	Comments
Specific Gravity	2.00 g/cc	2.00 g/cc
Mooney Viscosity	98 @Temperature 121 °C	98 @Temperature 250 °F	ML 1+ 10

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	75	75	Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 232°C; ASTM D2240
Tensile Strength at Break	21.2 MPa	3070 psi	Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 232°C; ASTM D412
Elongation at Break	155 %	155 %	Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 232°C; ASTM D412
100% Modulus	0.0106 GPa	1.54 ksi	Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 232°C; ASTM D412
Compression Set	37 % @Treatment Temp. 230 °C, Time 252000 sec	37 % @Treatment Temp. 446 °F, Time 70.0 hour	Method B, -214 O-rings, Aged 70 Hours, 25% Deformation; ASTM D395
	40 % @Treatment Temp. 200 °C, Time 252000 sec	40 % @Treatment Temp. 392 °F, Time 70.0 hour	Method B, -214 O-rings, Aged 70 Hours, 25% Deformation; ASTM D395
	49 % @Treatment Temp. 200 °C, Time 605000 sec	49 % @Treatment Temp. 392 °F, Time 168 hour	Method B, -214 O-rings, Aged 168 Hours, 25% Deformation; ASTM D395
	50 % @Treatment Temp. 230 °C, Time 605000 sec	50 % @Treatment Temp. 446 °F, Time 168 hour	Method B, -214 O-rings, Aged 168 Hours, 25% Deformation; ASTM D395

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	220 °C	428 °F
Brittleness Temperature	-35.0 °C	-31.0 °F
Transformation Temperature	-2.00 °C	28.4 °F	TR10

Descriptive Properties	Value	Comments
Color	White
Form	Crumb
MH, Maximum Toque	16.0 Inch-lb	100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D412
ML, Minimum Torque	2.0 Inch-lb	100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D412
t2, Time to 2 Inch-lb Rise from Minimum	0.5 Minutes	100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D412
t'50, Time to 50% Cure	0.7 Minutes	100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D412
t'90, Time to 90% Cure	1.7 Minutes	100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D412

Users viewing this material also viewed the following: