Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 5.00 min | 0.0833 hour | On metal (Fixture) |
ND Industries 612 Heptane-Acetone Anaerobic Primer Fast acting anaerobic primer. On part life 7 days. Non-ozone depleting but flammable solvent |
|||
Cure Time | 5.00 min | 0.0833 hour | With Primer (Fixture) |
ND Industries StudGrade® 140 Permanent Threadlocker General DescriptionHigh strength threadlockers for maximum security. Suitable for most applications where disassembly is not required.Typical Usesstuds and bolts, and threaded pipe fittings.Meets m.. |
|||
Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | |
Quantum Composites LYTEX® 4129 63% Glass Fiber Reinforced Epoxy SMC LYTEX 4129 is an epoxy high performance, glass fiber reinforced ESC molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention .. |
|||
Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | |
Quantum Composites LYTEX® 4181 55% Carbon Fiber Reinforced Epoxy SMC LYTEX 4181 is an epoxy ESC molding compound designed for structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance.. |
|||
Cure Time | 5.00 - 30200 min | 0.0833 - 504 hour | Average value: 2920 min Grade Count:19 |
Overview of materials for Thermoset Polyurethane, Liquid This property data is a summary of similar materials in the MatWeb database for the category "Thermoset Polyurethane, Liquid". Each property range of values reported is minimum and maximum values of.. |
|||
Cure Time | 5.00 - 10.0 min @Temperature 138 - 138 °C |
0.0833 - 0.167 hour @Temperature 280 - 280 °F |
Average value: 7.50 min Grade Count:1 |
Overview of materials for Epoxy/Carbon Fiber Composite This property data is a summary of similar materials in the MatWeb database for the category "Epoxy/Carbon Fiber Composite". Each property range of values reported is minimum and maximum values of a.. |
|||
Cure Time | 5.00 min | 0.0833 hour | Tack free |
Momentive Performance Materials TSE392 One Component RTV Adhesive Sealant/Coating, Clear/White TSE392, TSE397 and TSE399 adhesive sealants/coatings are one component RTV’s that cure quickly by reacting with atmospheric moisture forming a soft dielectric silicone rubber. These materials i.. |
|||
Cure Time | 5.00 min | 0.0833 hour | Tack Free Time |
Shin-Etsu Silicones KE-3418 Silicone, RTV Adhesive Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Cure Time | 5.00 min | 0.0833 hour | Tack Free Time |
Shin-Etsu Silicones KE-3475TUV Silicone, RTV Conformal Coating Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Cure Time | 5.00 min | 0.0833 hour | |
Shin-Etsu Silicones KEG-2001-70A/B Fast Curing LIMS Silicone Rubber ShinEtsu KEG200170 is a very fast cure liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG20.. |
|||
Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | Tack-free time |
Master Bond MasterSil 707FR Flame Retardant Silicone Adhesive Description: MasterSil 707FR is a one component, high performance RTV silicone that is mainly used for its flame retardancy. It is UL listed with a flame classification for 94V-1 for thicknesses of .. |
|||
Cure Time | 5.00 min @Temperature 100 °C |
0.0833 hour @Temperature 212 °F |
|
Tra-Con Tra-Bond F123 Color Keyed High Temperature Epoxy Adhesive TRA-BOND F123 is a fast cure, low viscosity, two-component epoxy formulation that signals both proper mixing and curing when bonding fiber optic bundles, potting glass fibers, and/or terminating sin.. |
|||
Cure Time | 5.00 min @Temperature 100 °C |
0.0833 hour @Temperature 212 °F |
|
Tra-Con Tra-Bond F123HV Color Keyed Thixotropic Epoxy Adhesive TRA-BOND F123 HV is a fast cure, high viscosity, two-component epoxy formulation that signals both proper mixing and curing when bonding fiber optic bundles, potting glass fibers, and/or terminating.. |
|||
Cure Time | 5.00 - 20.0 min | 0.0833 - 0.333 hour | for compression molded lab sheets |
TSE Industries Millathane® 28 Millable Polyester Polyurethane Rubber Millathane 28 has excellent resistance to gas (e.g., nitrogen) permeability as well as very good abrasion resistance and low temperature properties. This polyurethane rubber was designed for automot.. |
|||
Cure Time | 5.00 min @Temperature 150 °C |
0.0833 hour @Temperature 302 °F |
|
Loctite® 3563 Epoxy Snap Cure Underfill COB/DCA Encapsulants are essential to the reliability of flip chip assemblies because they minimize the thermal mismatch between the flip chip and substrate.Loctite® Underfills and Encapsulants imp.. |
|||
Cure Time | 5.00 min @Temperature 150 °C |
0.0833 hour @Temperature 302 °F |
|
Loctite® 3566 Rapid Flow Low Profile Underfill COB/DCA Encapsulants are essential to the reliability of flip chip assemblies because they minimize the thermal mismatch between the flip chip and substrate.Loctite® Underfills and Encapsulants imp.. |
|||
Cure Time | 5.00 - 1440 min | 0.0833 - 24.0 hour | Full Cure |
Loctite® 5205 Flexible Cure Flange Sealant Anaerobic GasketingLoctite® 5205 Flexible Cure Flange SealantFast curing and flexible, good sealing properties against oil and water/glycol particularly at high temperatures. High viscosity. Recom.. |
|||
Cure Time | 5.00 min | 0.0833 hour | |
Loctite® Depend© 330 Acrylic Bonding Adhesive Acrylic Bonding AdhesivesLoctite® Acrylic Adhesives were developed for bonding applications that require tensile, shear and peel strength combined with maximum impact, stress and shock resistance. .. |
|||
Cure Time | 5.00 min | 0.0833 hour | t'50, Target; ASTM D2084 (mod) |
ExxonMobil Chlorobutyl 1066 Rubber Product Description: Exxon™ Chlorobutyl rubber is a copolymer of isobutylene and isoprene. The product has characteristic specific gravity of 0.93. The product form is white to light amber bales.In.. |
|||
Cure Time | 5.00 - 11.0 min | 0.0833 - 0.183 hour | t`50; ASTM D2084 |
ExxonMobil Exxon™ 2222 Regular Cure Rate Grade Exxon Bromobutyl is a brominated copolymer of isobutylene and isoprene. The product for is white to light amber bales.Information provided by ExxonMobil Chemical |
|||
Cure Time | 5.00 min @Pressure 0.345 MPa, Temperature 121 °C |
0.0833 hour @Pressure 50.0 psi, Temperature 250 °F |
Recommended Cure Cycle |
Arlon 51986R015 0.0165" (0.419 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 7628 Fiberglass Side 2: Uncured Silicone Rubber Interleave: Polyethylene Product Use: Flexible heater substrateAppearance: Red colo.. |
|||
Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | Tack Free, 50% RH |
3M PN8027 Marine Grade Silicone Sealant A mildew resistant, non-sagging, moisture curing silicone rubber sealant for above the waterline applications which remains flexible with excellent resistance to the marine environment. Adheres to b.. |
|||
Cure Time | >= 5.00 min | >= 0.0833 hour | Tack Free Time, 2:1 |
ACC EP JS EPI Engineered Polymers Joint Sealant EP JS Joint Sealant JS, “Powered by Reactamine® Technology” is a two component 100% solid (silicone optional) polyurea based joint sealant. EP JS is a self-leveling joint sealant designed to prot.. |
|||
Cure Time | <= 5.00 min | <= 0.0833 hour | Fixture Time with Activator |
3M Scotch-Weld™ TL62 Threadlocker Anaerobic Adhesive 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives are one-component anaerobic adhesives that cure and seal threaded assemblies that meet a wide range of applications to prevent vibration loosening.. |
|||
Cure Time | <= 5.00 min | <= 0.0833 hour | Fixture Time with Activator |
3M Scotch-Weld™ TL71 Threadlocker Anaerobic Adhesive 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives are one-component anaerobic adhesives that cure and seal threaded assemblies that meet a wide range of applications to prevent vibration loosening.. |
|||
Cure Time | 5.00 min | 0.0833 hour | Fixture |
Resinlab® RC8080 Anaerobic Retaining Compound The RC 8000 Series anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products .. |