Processing Properties | Metric | English | Comments |
---|---|---|---|
Processing Temperature | 25.0 °C | 77.0 °F | Curing Agent Temperature |
Northstar Polymers MGB-A80AQ High Performance Polyurethane Cast Elastomer System 80A This is a PTMEG/MDI base high-performance polyurethane casting system. This system is recommended to applications in which the part requires high rebound, slide abrasion, constant water contact and.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing Agent Temperature |
Northstar Polymers MSB-A95A High Performance Polyurethane Cast Elastomer System This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
Processing Temperature | 25.0 - 125 °C | 77.0 - 257 °F | Average value: 36.2 °C Grade Count:53 |
Overview of materials for Silicone, RTV, Adhesive/Sealant Grade This property data is a summary of similar materials in the MatWeb database for the category "Silicone, RTV, Adhesive/Sealant Grade". Each property range of values reported is minimum and maximum va.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 3 weeks |
Abatron AboCast 8-4/Abocure 8-4 Epoxy
(discontinued **) 2-part solvent-free dielectric epoxy casting compound.Processing: 100/60 ratio (pbw); Gel time, 100 g (3.5 oz.): 240 minutes; cures in 3 weeks at 25°C (77°F).Applications: solventless casting, adh.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 3 weeks |
Abatron AboCast 8-5/Abocure 8-5 Epoxy
(discontinued **) 2-part solvent-free dielectric epoxy casting compound.Processing: 100/80.5 ratio (pbw); Gel time, 100 g (3.5 oz.): 300 minutes; cures in 3 weeks at 25°C (77°F).Applications: solventless casting, a.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 16 hours; Postcure: 2 hours/100°C (212°F) |
Abatron AboCast 8-7/Abocure 8-7 Epoxy
(discontinued **) 2-part solvent-free dielectric epoxy casting compound.Processing: 100/50 ratio (pbw); Gel time, 1 lb. (2.2 kg): 125 minutes; cures in 16 hours at 25°C (77°F); postcure: 2 hours at 100°C (212°F)... |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 16 hours; Postcure: 2 hours/100°C (212°F) |
Abatron AboCast 8-14/Abocure 8-14 Epoxy
(discontinued **) 2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/12.10 ratio (pbw); Gel time, 100 g (3.5 oz.): 63 minutes; cures in 16 hours at 25°C (77°F); postcure: 2 hours at 100°.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 2 weeks |
Abatron AboCast 8-16/Abocure 8-16 Epoxy
(discontinued **) 2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/35.00 ratio (pbw); Gel time, 100 g (3.5 oz.): 57 minutes; cures in 2 weeks at 25°C (77°F).Applications: solventless ca.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 2 weeks |
Abatron AboCast 8-19/Abocure 8-19 Epoxy
(discontinued **) 2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/32.00 ratio (pbw); Gel time, 100 g (3.5 oz.): 120 minutes; cures in 2 weeks at 25°C (77°F).Applications: solventless c.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Average value: 25.0 °C Grade Count:27 |
Overview of materials for Silicone, RTV, Encapsulation Grade This property data is a summary of similar materials in the MatWeb database for the category "Silicone, RTV, Encapsulation Grade". Each property range of values reported is minimum and maximum value.. |
|||
Processing Temperature | 25.0 - 27.0 °C | 77.0 - 80.6 °F | Average value: 26.2 °C Grade Count:13 |
Overview of materials for Silicone, RTV, Construction Grade This property data is a summary of similar materials in the MatWeb database for the category "Silicone, RTV, Construction Grade". Each property range of values reported is minimum and maximum values.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure Schedule: 7 days @ 25°C |
Huntsman HY 3440 Phenalkamine Hardener Approx. H+ equivalent weight 80. Mix Ratio with GY 6010 is 30.Comments/Applications: Low temperature cure coatings with excellent corrosion and moisture resistance. Cure can go down to 0°C. F.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure Schedule: 7 days @ 25°C |
Huntsman HZ 9795 W-75 Aromatic Amine Approx. H+ equivalent weight 77. Mix Ratio with GY 6010 is 30.Comments/Applications: High solids coatings, floorings and tank linings. Good acetic acid resistance and other aggressive environment.. |
|||
Processing Temperature | 25.0 - 80.0 °C | 77.0 - 176 °F | Hardening Temperature |
Möller Medical PolySkin 78 M NanoCoating Decorative coating in "metallic look," hardening at room temperature up to 80°C.Information provided by Möller Medical, Member of CENTROTEC Group |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV106 Red Adhesive Sealant, High Strength, High Temperature Paste One-part alkoxy cure. Typical uses: High-heat applications; encapsulate and seal heating elements.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV118 Translucent Adhesive Sealant, General Purpose Pourable One-part acetoxy cure. Acetoxy cure silicones are the most commonly used type of RTV materials and are considered GE Silicones' general purpose product line. Typical uses: Thin-section protective .. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV128 Translucent Adhesive Sealant, General Purpose Paste One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: General purpose for bonding .. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure time 24 hrs. |
Momentive Performance Materials RTV41 White General Purpose Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV5223 Black Adhesive Sealant, Low Modulus Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Economical true neu.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure time 2 hours. |
Momentive Performance Materials RTV627 Dark Gray General Purpose Potting/Encapsulating Compound Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV6802 White Adhesive Sealant, Industrial Plastic Adhesive One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Primerless adhesion to many .. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure time 24 hrs. |
Momentive Performance Materials RTV8112 White General Purpose Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials TSE3941 White Adhesive Sealant, Fast Cure Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Flame retardant, no.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure time 24 hrs. |
Momentive Performance Materials RTV560 Red Extreme High Temperature Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Momentive Performance Materials RTV5818 Translucent Adhesive Sealant, Fast Cure Paste One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Fast-curing primerless adhes.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | Cure time 8+ hours. |
Momentive Performance Materials RTV6186 Clear Potting/Encapsulating Gel Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Abatron AboCast/AboCure 8109-11 All-purpose, structural dielectric resin. Better thermal and chemical properties than 8109-8, but requires heat cure. Melts at 70-80°C and remains liquid (supercooled) for many hours at RT.Process.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Abatron AboCast/AboCure 8109-3 Low viscosity, RT cure. Easy processing.Processing: 100/10 pbw; Potlife: 2.5 h/20°C (68°F), 30 min/40°C (105°F), 15 min/60°C (140°F); mix at RT; cures in: 24 h/20°C (68°F), 2-3 h/60°C (140.. |
|||
Processing Temperature | 25.0 °C | 77.0 °F | |
Abatron AboCast/AboCure 8109-8 All-purpose, structural dielectric resin. High thermal and chemical resistance and RT cure.Processing: 100/12 ratio; Potlife: 45 min/20°C (68°F), 20 min/40°C (105°F), 10 min /60°C (140°F); mi.. |