- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 350 °F
Polymer Property : Maximum Service Temperature, Air = 350 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Reltek BONDiT™ B-45 Adhesive, Sealant & Coating System Key Properties: Excellent adhesive for low surface energy plastics without primer.Used in potting, painting and protective coating applications.Excellent thermal and mechanical shock resistance.Ease.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Reltek BONDiT™ B-482 Adhesive, Sealant & Coating System Key Properties: Excellent balance of chemical, electrical, and mechanical properties.Ruggedized, semi-flexible system.Very clean system.Ease of use.Applications: Encapsule sensitive instrumentation .. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Permabond LH054 Anaerobic Threadsealant Permabond® LH054 is an anaerobic curing, calibrated strength pipe sealant that allows for easier disassembly – especially of larger diameter pipes. It cures anaerobically when in contact with meta.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Permabond LM012 Anaerobic Threadsealant Permabond® LM012 is an unfilled, medium viscosity anaerobic adhesive. Its major benefit as related to other pipe sealants is that it is an unfilled resin that is compatible with hydraulic fluids. I.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-5513 High Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film. For applicati.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-2811 Ultra Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film at zero wet out.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-2821 Ultra Tack Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of silicone coated paper and film at zero wet out.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-7411-5 Fume Mask
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Good conformabilityChemical resistantApplications: For protecting large areas of printed circuit boards from splash and fumes duri.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-8511-2 Masking Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Fine line definitionClean tape removalGood conformabilityHigh temperature resistantApplications: For automotive and other masking .. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-9512 Powder Coating Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Fine line definitionClean tape removalGood conformabilityNo film shrinkage after exposure to elevated temperaturesAbrasion resista.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® K103 Polyimide Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100°F to 500°F (-73°C to 260°C). These flame retardant films exhibit .. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M730 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M823 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M827 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Saint-Gobain CHR® M52 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Master Bond EP21TDCHTND Versatile, toughened two component epoxy for bonding, sealing and coating Product Description: Master Bond EP21TDCHTND is a two component epoxy adhesive, sealant and coating featuring high performance, versatility and exceptional user friendliness. It has a very forgiving.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | intermittent |
| Thermoseal RG-N100 PTG Gasketing Thermoseal RG-N100 is a nitrile butadiene rubber, reinforced cellulose fiber and mineral filler general purpose gasket material. Continuous roll lengths allow efficient and economical fabrication wi.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | High strength retained |
| Hexcel® HexWeb® HRP - 3/8 - 3.5 Fiberglass/Phenolic Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb HRP is a glass fabric reinforced honeycomb in which a heat-resistant phenolic resin is used both for initial and final impregnations. This prod.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Hexcel® HexWeb® HRP/F35 - 4.5 Nonmetallic Flex-Core Honeycomb Designation: Material/Cell Size (cells per lineal foot in W direction)-DensityHexcel manufactures two types of nonmetallic reinforced plastic HexWeb Flex-Core: HexWeb HRP - Fiberglasses cloth reinfo.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| TriStar FCJ Composite Bearing This family of materials offers the combination of high compressive strength, low coefficient of friction, and excellent abrasion and corrosion resistance while running without lubrication. They are.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Master Bond UV15TK High Temperature Resistant One Component UV Curable System Master Bond UV15TK is a moderate viscosity, epoxy based UV curable system for bonding, sealing and coating. It is 100% reactive and does not contain any solvents or other volatiles. It is also compl.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Loctite® 5083 Silicone Light Cure Adhesive Silicon Light Cure AdhesivesLoctite® 5083 Silicone Light Cure Adhesive Key Substrates: Glass, Metal, Ceramic Cure Type: Ultraviolet, Moisture, Methoxy Bonding Type: Silicon |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | Operating Temperature |
| Devcon Brushable Ceramic - Red, Blue Epoxy Precision Repair EpoxyComments: Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth, protective barrier against wear, abrasion, corrosion,.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | Operating Temperature |
| Devcon Brushable Ceramic - White Epoxy Precision Repair EpoxyComments: Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth, protective barrier against wear, abrasion, corrosion,.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| CMT Materials HYTAC® C1R Highly Durable Syntactic Foam, Dust-Free Machining/Polishing HYTAC-C1R is easily machined without the dust typically associated with epoxy syntactic foam. This new copolymer base has been optimized for both the machine shop and the thermoforming process.Exce.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| CMT Materials HYTAC® XTL Tough Thermoplastic Syntactic Foam HYTAC®-XTL was developed to offer an improved surface quality after machining when compared to our popular HYTAC-B1X. This is particularly important when working with sticky or transparent plastic.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-701 Acrylic Tape
(discontinued **) Acrylic adhesive with polyester film backing.Features: Chemical resistantTemperature resistantGood conformabilityApplications: Splicing of non-silicone coated substrates. Provides high temperature s.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Dielectric Polymers NT-583 Linered Polyimide Film Tape
(discontinued **) Crosslinked silicone adhesive with polyester film backing.Features: Fine line definitionClean tape removalGood conformabilityChemical resistantApplications: For PCB masking during the solder strip b.. |
|||
| Maximum Service Temperature, Air | 177 °C | 350 °F | |
| Loctite® Nuva-Sil® 5091 High Adhesion Potting Potters and Silicon Light Cure AdhesivesLoctite® Potting materials are used on electronic device housings to enhance mechanical strength, provide electrical insulation and enhance vibration and sho.. |
|||
Copyright © lookpolymers.com All Rights Reserved