Thermal Properties | Metric | English | Comments |
---|---|---|---|
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee S-WVMW Aluminum-potassium Silicate-doped tungsten Applications: anode materials - rod greater than 30 mm in diameter for short-arc lampsInformation provided by Plansee. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WC20 Cerium Oxide-doped Tungsten Non-radioactive material for welding electrodesCharacteristics (compared to pure tungsten):Lower electron work functionImproved ignition characteristicsLonger service lifeInformation provided by Pla.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WL10 Lanthanum Oxide-doped Tungsten Tungsten alloy suitable for use as ion sources, lamp electrodes and welding electrodes.Characteristics (compared to pure tungsten):Improved creep resistanceHigher recrystallization temperatureMachin.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WL15 Lanthanum Oxide-doped Tungsten Tungsten alloy suitable for use as ion sources, lamp electrodes and welding electrodes.Characteristics (compared to pure tungsten):Improved creep resistanceHigher recrystallization temperatureMachin.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WL20 Lanthanum Oxide-doped Tungsten Tungsten alloy suitable for use as ion sources, lamp electrodes and welding electrodes.Characteristics (compared to pure tungsten):Improved creep resistanceHigher recrystallization temperatureMachin.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WL-S Lanthanum Oxide-doped Tungsten Tungsten alloy suitable for use as support rods in high-pressure discharge lamps.Characteristics (compared to other tungsten-lanthanum oxide alloys):More fine-grained microstructureHigher strength a.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WLZ Lanthanum Oxide and Zirconium Oxide-doped Tungsten A non-radioactive Tungsten alloy suitable for the manufacture of cathodes used in high-load environments.Characteristics:High creep resistanceGood stability at extremely high temperaturesGood igniti.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee W-NS Potassium-doped Tungsten Doping tungsten with 60 to 65 ppm potassium produces an elongated stacked microstructure, yielding useful characteristics in wire products.Characteristics:Good creep resistanceGood high temperature .. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WVM Potassium-doped Tungsten Doping tungsten with potassium and subjecting the material to a highly orientation-dependant cold working produces a stacked microstructure, yielding useful characteristics in wire and rod products.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | comparable to pure W |
Plansee WVMW Aluminum-potassium Silicate-doped tungsten Typical Application: anode materials - rod with diameter greater than 15 mm, for short-arc lampsInformation provided by Plansee. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
Vista Metals Duramold-2™ Cast Aluminum Mold Plate Used for molds for the automotive industry, blow molds, structural foam molds, rubber molds, low pressure injection molds, Thermoforming molds, R.I.M. and R.T.M. molding.Features: Excellent Machinab.. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
Alcoa Excalibar® 6013-T8 Aluminum, 0.3-1.9 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
Alcoa Excalibar® 6013-T8 Aluminum, 1.9-3.8 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
Alcoa Excalibar® 6013-T8 Aluminum, 3.8-8.2 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
Alcoa Excalibar® 6013-T651 Aluminum Alcoa recommends as a higher machinability alternative to 6061-T651. It has the potential for higher machining speeds and feed rates, easier deburring,ease of clearing 'chips' and better finishes. .. |
|||
Thermal Conductivity | 164 W/m-K | 1140 BTU-in/hr-ft²-°F | |
ECOMold 95 Copper Mold Material ECOMold® copper alloys (beryllium-free) are designed specifically for plastics industry applications. ECOMold® 95 has a superior combination of thermal conductivity, hardness, and tensile strengt.. |