Thermal Properties | Metric | English | Comments |
---|---|---|---|
Flash Point | 83.0 °C | 181 °F | |
Permabond 738 Cyanoacrylate, toughened PERMABOND 738 is a toughened cyanoacrylate with improved impact and peel strength when compared to a conventional cyanoacrylate. It bonds rapidly at room temperature and its viscosity is stable over.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 200 Cyanoacrylate, wire tacking PERMABOND 200 is a high viscosity product with good flow control useful in wire tacking applications or bonding components. It is fast setting and suitable for use on plastics, rubber and metals. Cy.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 260 Cyanoacrylate PERMABOND 260 is a low viscosity cyanoacrylate ideal for wicking type application. PERMABOND 260 provides faster set times and improved gap-filling capability compared to conventional cyanoacrylates.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 265 Cyanoacrylate PERMABOND 265 is a medium viscosity cyanoacrylate ideal for intermediate gap fill application. PERMABOND 265 provides faster set times and improved gap-filling capability compared to conventional cy.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 798 Cyanoacrylate, Surface insensitive PERMABOND 798 is a high viscosity cyanoacrylate that combines fast cure with the ability to cure through a large gap. Plastics, Metals, Ceramics and elastomers are also rapidly bonded. The fast cu.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 930 Cyanoacrylate PERMABOND 930 is a low odor, nonfogging, nonfrosting cyanoacrylate. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The .. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 931 Cyanoacrylate PERMABOND 931 is a low odor, nonfogging, nonfrosting cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesiv.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 932 Cyanoacrylate PERMABOND 932 is a low odor, nonfogging, nonfrosting cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesiv.. |
|||
Flash Point | 83.0 °C | 181 °F | Open cup |
Dow Corning BY 25-320 This is a clear viscous liquid, where approximately 20% of an ultra high viscosity Dimethicone gum is dispersed into iso-paraffin.Areas of potential use for BY 25-320 encompass a wide range of Cosme.. |
|||
Flash Point | 83.0 °C | 181 °F | closed cup |
Dow Corning SYL-OFF® 7138 HIGH SPEED CROSSLINKER Syl-Off® 7138 High Speed Crosslinker is a 100% active solids crosslinker additive. Recommended for high speed coating conditions where generation of silicone mist is an issue, and Syl-Off® 7678 Cr.. |
|||
Flash Point | 83.0 °C | 181 °F | Closed cup |
Dow Corning SYL-OFF® PMCP7138 High Speed Crosslinker Syl-Off® 7137 High Speed Crosslinker is a 100% active solids crosslinker additive. Recommended for high speed coating conditions where generation of silicone mist is an issue, and Syl-Off® 7678 Cr.. |
|||
Flash Point | 83.0 °C | 181 °F | ASTM D92 |
ChevronTexaco 250 NC Open Gear Lubricant FeaturesChevron Open Gear Lubricants are black, viscous lubricants formulated with an asphaltic base and diluted with a nonchlorinated solvent for easy application by hand or through automatic lubri.. |
|||
Flash Point | 83.0 °C | 181 °F | |
BASF Diethyleneglycol Divinyl Ether Formula: C8H14O3CAS: 764-99-8Description: Diethyleneglycol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is immiscible with water.Synonyms: DVE-2, 3,6,9-Trioxaundeca.. |
|||
Flash Point | 83.0 °C | 181 °F | |
Permabond 262 Cyanoacrylate PERMABOND 262 is a low viscosity cyanoacrylate ideal for wicking type application. PERMABOND 262 provides faster set times and improved gap-filling capability compared to conventional cyanoacrylates.. |