Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL 1401 Conductive Elastomer High performance for non-corrosive environments; soft(45 Shore A) for low closure force where gasket geometry cannot be exploited; low tear strength; no fluid resistance. Molded and ExtrudedRoHS Com.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | |
Parker Chomerics CHO-SEAL 1501 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | Die B |
Momentive Performance Materials RTV11 White General Purpose Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 |
Momentive Performance Materials Silpruf® Construction Sealant One-part, for weatherseals, structural glazing, and general purpose sealing. Cure Method: Alkoxy (Neutral). Tack-free time 5 to 10 hr.; Peel Strength 55 lb/in.; Sag/slump 0.1 in.Data provided by the.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 |
Solvay Specialty Polymers Polidiemme® G/440 Thermoset Elastomer (TSE) Elastomer based compound crosslinkable by ambient moisture, consisting of a silane pregrafted base compound to be used with a catalyst masterbatch (Sioplas® method)Standards complying: Cenelec HD.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | JIS K6301-B |
Stellarchem GP-980 TPE Compound This grade of Stellarchem TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, complete.. |