Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 1.38 GPa | 200 ksi | Tangent; ASTM D790 |
RheTech Products HP521-00UV 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Natural Applications: Interior trimIP structural componentsCenter consolesInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | Tangent; ASTM D790 |
RheTech Products HP521-501UV 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, 149B Shale Applications: Interior trimIP structural componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Flexural Modulus | 1.38 - 2.76 GPa | 200 - 400 ksi | ASTM D790 |
Alcoa KAMA 3210 Hi-Gloss Coextruded High Impact Polystyrene
(discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone coat.. |
|||
Flexural Modulus | 1.38 - 2.41 GPa | 200 - 350 ksi | ASTM D790 |
Alcoa KAMA 3300 Very High Impact Polystyrene
(discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone coat.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | Tangent; ASTM D790 |
Flint Hills AP5325-HS Impact Copolymer Polypropylene High impact copolymer, UL certified, and FDA compliant. Features: Nucleated and heat stabilizedApplications: Injection molding: large, thin wall automotive interior parts.Former Huntsman polypropyle.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | 1% Tangent, 1.27 mm/min; ASTM D790A |
I. Stern 1335 Prime Homopolymer Polypropylene Features:Excellent flow characteristicsFDAGood mold releaseLow odor and tasteApplicationsClosuresHousewaresSmall appliancesToysInformation provided by I. Stern & Co. Inc. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
LG Chemical LUPOL GP-1000FA General Purpose Polypropylene, High Impact, Flame Retardant, Non-Bleed LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive: Bumper cover, instrument panel, glove box, air cleaner.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics SABIC PPCOMPOUND 8620 PP SABIC® PPcompound 8620 is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and good flow with exterior automotive weathering stability. It was origin.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | secant; ASTM D790 |
Spartech EP6240 Filled and Reinforced Copolymer Filled copolymers offer a higher level of impact performance than homopolymer materials, and higher stiffness than unfilled copolymers. Copolymer based materials retain much of their impact strength.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Spartech Royalstatâ„¢ R675 PS Alloy Static Control Sheet Description: Static Control SheetInformation provided by Spartech. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Chase Plastics CP Pryme® NN100STL (DAM) Nylon 66, Super Toughened, Internally Lubricated Information provided by Chase Plastics. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Chase Plastics CP Pryme® NN300STL (DAM) Nylon 66 (Utility Grade), Super Toughened, Internally Lubricated Information provided by Chase Plastics. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
A. Schulman PP 3490-01G Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3490-01G Natural is a homopolymer for extrusion and compounding applications. This material can also be used as a carrier resin for color concentrates. ApplicationPP 349.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | Tangent; ASTM D790 |
Washington Penn Medium Impact Copolymer 20% Calcium Carbonate Filled Calcium carbonate-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug pa.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
A. Schulman PP 3449-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 3449-01 is a new generation copolymer polypropylene utilizing unique catalyst technology. Combining an excellent balance of high stiffness and impact. This product inc.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 4101O BCF Fiber Spinning Polypropylene HomopolymerApplications: Multifilament and bulk continuous filament fiber.Formolene 4101O is a low viscosity, highly isotactic polypropylene homopolymer designed primarily for multifilament and bulk.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
A. Schulman PP 3488-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3488-01 is a specially formulated homopolymer polypropylene designed for large appliance injection molding. This material has excellent chemical resistance in addition t.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Clariant Renol PCSP0015 Polycarbonate, Carbon Fiber Filled Data provided by Clariant Masterbatches |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | 0.05 in/min; 1% secant; Procedure A; ASTM D790 |
Phillips 66 COPYLENE® CH014 Polypropylene, Homopolymer, Extrusion, Strapping COPYLENE™ CH014 is a polypropylene homopolymer resin designed for extrusion applications. Applications: Raffia/Tapes/Strapping; Geotextile & Agriculture; Nets. Equivalent to Pro-fax® HL781GInforma.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Amco PRIMATOP HDPE 002955 Phillips Process Hexene Copolymer PRIMATOP HDPE 002955 has a high melt strength, excellent stiffness, and excellent stress crack resistance. Applications include large part blow molding resin and sheet extrusion thermoforming.Former.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
A. Schulman PP 3488-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3488-01 is a specially formulated homopolymer polypropylene designed for large appliance injection molding. This material has excellent chemical resistance in addition t.. |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | ASTM D790 |
Chevron Phillips Marlex® HMN 55180 Polyethylene, Injection Molding Grade, HDPE
(discontinued **) Meets FDA Regulation 177.1520. Excellent impact strength and warpage resistance; high surface gloss.Data provided by the manufacturer |
|||
Flexural Modulus | 1.38 GPa | 200 ksi | 1.3mm per min, 1% secant; ASTM D790 |
Formosa Plastics Formolene® 4111T Homopolymer Polypropylene Homopolymer for Non-Wovens and Extrusion Coating Formolene® 4111T is a low viscosity, polypropylene homopolymer designed for extrusion coating, and Nonwoven applications. Its unique combination of .. |