Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
MetalTek C81500 Chrome Copper High Conductivity Information provided by MetalTekCast UNS C81500; Cast Grade C81500; Military MIL-C-19310 |
|||
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
MetalTek HASTELLOY® S Severe Corrosion and Heat Resistant Alloy Information provided by MetalTek |
|||
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
MetalTek MTEK WC 1 UNS J13047 Cast Alloy Steel General structural use.Applications: Cylinders, rolls, hollow shafts.Information provided by MetalTek |
|||
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
MetalTek MTEK 28-48WCo Heat Resistant Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
MetalTek MTEK 30-20 Cast UNS N08604 Heat Resistant Stainless Steel Provides strength levels of HK with improved corrosion resistance to hot gases.Applications: Similar to HN.Information provided by MetalTekCast UNS N08604; Cast Grade HL; Cast ASTM A297, A608 |
|||
Tensile Strength, Yield | 240 MPa @Strain 0.200 %, Temperature 540 °C |
34800 psi @Strain 0.200 %, Temperature 1000 °F |
|
Haynes 556® alloy, cold rolled, solution annealed sheet, 0.8-2.8 mm thick Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
Tensile Strength, Yield | 240 MPa | 34800 psi | Annealed |
Special Metals MONEL® Alloy 400 A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalis. Used for marine engineering, chem.. |
|||
Tensile Strength, Yield | 240 MPa @Strain 0.200 % |
34800 psi @Strain 0.200 % |
Annealed |
Special Metals MONEL® Alloy R-405 The free-machining version of MONEL alloy 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. Other characteristics a.. |
|||
Tensile Strength, Yield | 240 MPa @Strain 0.200 % |
34800 psi @Strain 0.200 % |
Annealed prior to test |
Special Metals NILO® Alloy 36 Low-Expansion Alloy Inflection point 220°C. A nickel-iron low-expansion alloy containing 36% nickel. It maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coeffic.. |
|||
Tensile Strength, Yield | >= 240 MPa | >= 34800 psi | |
SSAB Tunnplat Domex® 240YP Cold-forming Steel, HSLA Cold-forming Steel, HSLACharacteristics: Domex® is the brand name of hot rolled products from SSAB Tunnplat. Domex® cold-forming steels are modern structural steels. General use of Domex®.. |
|||
Tensile Strength, Yield | >= 240 MPa @Strain 0.200 % |
>= 34800 psi @Strain 0.200 % |
|
ALIMEX PLANAL 6082 T651 Aluminum Alloy Aluminium rolled plates which have been machined on both sides. Has a precise surface finish and high tensile strength. The temper values and the material conditions are not changed by surface-machi.. |
|||
Tensile Strength, Yield | 240 MPa | 34800 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® A3EG10 50% Glass Filled PA66 (Dry) Description: 50% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness as well as for electric insulating parts.Information provided by BASF |
|||
Tensile Strength, Yield | >= 240 MPa @Strain 0.200 % |
>= 34800 psi @Strain 0.200 % |
|
ALIMEX 2017A T451 Aluminum Alloy Rolled Rolled aluminium material according to DIN EN standard. Information provided by ALIMEX GmbHSolution heat treated, stress relieved by stretching a controlled amount and then naturally aged. |
|||
Tensile Strength, Yield | 240 MPa | 34800 psi | Typical |
ATI Allegheny Ludlum AL 400™ Nickel-Base Alloy, Annealed Plate, Sheet, and Strip, UNS N04400 Moderately to faintly magnetic at room temperature. Allegheny Ludlum AL 400 alloy is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequentl.. |
|||
Tensile Strength, Yield | 240 MPa @Strain 0.200 % |
34800 psi @Strain 0.200 % |
|
Haynes 556® alloy, bar after 16000 hours at 760°C (1400°F) Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
Tensile Strength, Yield | 240 MPa @Temperature 870 °C |
34800 psi @Temperature 1600 °F |
|
Haynes Hastelloy® alloy 625 12.7 mm plate weldments Solid solution-strengthened developed as a filler metal for welding of dissimilar alloys. Applications include excellent dissimilar welding characteristics in the gas turbine, aerospace, and chemica.. |