Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D412 |
Polymax® Maxelast® P3790 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D412 |
Precision Polymer Engineering V97D Fluoroelastomer Compound Fluoroelastomer Rubber, 92-98 °IRHD. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. Tested at the Shell Thornton Research Centre, where it has shown excellent res.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D638 |
ExxonMobil LL 6202 Injection Molding Resin
(discontinued **) LL 6202 is a narrow molecular weight butene copolymer designed for applications that require excellent toughness. This resin offers easy processability for applications that require outstanding tear.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D638 |
Lotte Chemical Titan TITANEX® LI2516 Linear low density polyethylene resin
(discontinued **) LI2516 is a pelleted linear low density polyethylene with very narrow molecular weight distribution.Applications: House-wares, lids, closures and toys.Advantages: Excellent stress crack resistance,.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | ASTM D638 |
Lotte Chemical Titan TITANLENE® LDI300YY Low density polyethylene resin LDI300YY is a low density polyethylene resin for injection molding and is a barefoot grade. LDI300YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 2.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SFW 8000 Polyvinyl Chloride, Flexible Availability: Asia Pacific Uses: Footwear; General Purpose Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | BP 13B/1 |
SIDPEC EGYPTENE® LL 2406 AA LLDPE Pipe Grade Applications:Drip irrigation pipeSmall potable water pipeInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SFC 8500 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Foamable Uses: Footwear Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SFN 8510 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Oil Resistant Uses: Footwear Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | at 300% elongation; ASTM D412 |
Lubrizol Estane® S185A Thermoplastic Polyurethane Type: Estane® S185A is a Shore 87A, polyester based thermoplastic polyurethane (TPU). FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding, Extrusion.Availability: AsiaInformation Prov.. |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | at 100% elongation; ASTM D412 |
Lubrizol Estane® X-595A-3FR Thermoplastic Polyurethane Type: Estane® X595A-3FR TPU is a Shore 94A, polyester type thermoplastic polyurethane elastomer.Uses: Film Blowing, Extrusion.Available in AsiaInformation Provided by The Lubrizol Corporation |
|||
Tensile Strength, Yield | 11.8 MPa | 1710 psi | |
Dow DOWLEX™ IP-2580 Linear Low Density Polyethylene Next Generation DOWLEX® IP-2580 resin is an improved processing linear low density polyethylene resin designed for excellent flow and stiffness with freezer grade impact properties. DOWLEX IP-2580 .. |