Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | |
Premix Thermoplastics PREFLEX E100 Polyphenylene Ether (PPO/PPE) PREFLEX films combine outstanding dielectric properties, good heat stability, low water absorption and chemical resistance in a way not available before. Also rigid boards made of the same material .. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882 |
Chevron Phillips Dynex™ D604D6 Enhanced LLDPE Blown Film Resin
(discontinued **) Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, ca.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882 |
DuPont™ Dartek® N-201 Nylon 6,6 Non-Forming Film, 25 µm Thickness
(discontinued **) Data provided by DuPont Packaging Polymers.A nylon film made from type 6,6 polymer - the condensation product of adipic acid and hexamethylene diamine. Primarily formulated for pouch and primal bag .. |
|||
Film Tensile Strength at Break, MD | 52.0 - 240 MPa | 7540 - 34800 psi | Average value: 115 MPa Grade Count:7 |
Overview of materials for Nylon 66, Film This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Film". Each property range of values reported is minimum and maximum values of appropriate Mat.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882-02 |
Ipiranga Petrochem LB 0120 BS LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882 |
Iran Petrochemical (PCC) 16503 Linear Low Density Polyethylene 16503 is a LLDPE for general purpose cast stretch film grade. The ease of processing and the low gels make 16503 well suited for production of general purpose monolayer or multilayer cast stretch fi.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882-02 |
Ipiranga Petrochem LTH 0212 LLDP IPQ produces Linear Low Density Polyethylene (LLDPE) for use by plastics molding industry segments that employ extrusion processes in the manufacturing of films destined for producing bobbins and ba.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ASTM D882 |
Chevron Phillips MarFlex® D143FK Metallocene Linear Low Density Polyethylene, Blown Film This mLLDPE is tailored for applications that require:Excellent clarityExcellent glossExcellent toughnessExcellent heat sealTypical blown film applications include:Seal layer in coextrusionsHeavy du.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | |
Dow DOWLEX™ 2267A Linear Low Density Polyethylene, Blown Film Grade DOWLEX® 2267A Polyethylene resin is a high performance blown film polymer offering superior load retention and toughness for a variety of stretch film packaging applications. This material complies.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | ISO 527-3 |
Dow INSPIRE™ 112 Performance Polymer INSPIRE™ 112 Performance Polymer is a propylene-based resin intended for use in film and sheet extrusion.Information provided by Dow |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | 2 in/min; ASTM D-882 |
Bapolene® 345F Medium Density Polyethylene Film Resin Description: Bapolene 345F is a medium molecular weight film resin with excellent tensile, impact, and tear properties. Applications: Merchandise bags, produce and trash bags.Bapolene® and Bapolan®.. |
|||
Film Tensile Strength at Break, MD | 52.0 MPa | 7540 psi | |
Bapolene® 350F Polyethylene, Film Grade Applications: Blown film extrusion of T-shirt sacks, merchandise bags.Film properties below are based on a thickness of .8 mil and blow-up ratio of 4:1.Bapolene® and Bapolan® are registered tradem.. |