Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 152 MPa @Strain 1.00 %, Temperature 500 °C |
22000 psi @Strain 1.00 %, Temperature 932 °F |
EN min.; EN 10002-5 |
Outokumpu 4878 High Temperature Austenitic Stainless Steel Heat-resistant variant of 1.4541, with a slightly higher max carbon content. Recommended max service temperature for this steel in dry air is 800°C. Applications: Heat and creep resistance. For .. |
|||
Tensile Strength, Yield | 152 MPa @Thickness 1.57 mm |
22000 psi @Thickness 0.0620 in |
LW; ASTM D638 |
Industrial Laminates/Norplex NP843 Paper Base Laminate Description: Paper reinforced phenolic grade with controlled conductivity. Mechanical strength similar to NP611. NP843 has conductive surfaces only, as compared to NP842, which is conductive through.. |
|||
Tensile Strength, Yield | 152 MPa @Strain 0.200 %, Temperature 760 °C |
22000 psi @Strain 0.200 %, Temperature 1400 °F |
|
Haynes 75 Nickel Alloy Sheet, Annealed at 1925°F (1050°C) Haynes alloy 75 is a solution-strengthened nickel-chromium alloy with moderate strength to 1200°F (650°C). It is principally used in low stress elevated temperature applications requiring reas.. |
|||
Tensile Strength, Yield | 152 MPa @Strain 0.200 %, Temperature 371 °C |
22000 psi @Strain 0.200 %, Temperature 700 °F |
|
AK Steel 409 ULTRA FORM® Stainless Steel AK Steel 409 ULTRA FORM Stainless Steel provides an outstanding combination of improved forming and welding characteristics, while providing superior resistance to oxidation, corrosion, ridging and .. |
|||
Tensile Strength, Yield | 152 MPa @Temperature 649 °C |
22000 psi @Temperature 1200 °F |
ASTM E8 |
ATI Allegheny Ludlum 309 Austenitic Stainless Steel Characteristics: comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than common austenitic alloys. Good creep defo.. |
|||
Tensile Strength, Yield | 152 MPa @Temperature 288 °C |
22000 psi @Temperature 550 °F |
Longitudinal |
ATI Wah Chang Zirconium Alloy Zircaloy-4 Zirconium resists corrosive attack in most organic and mineral acids, strong alkalis, and some molten salts. A tightly adherent and protective oxide film protects the metal-oxide interface to provid.. |