Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 103 MPa @Strain 0.200 %, Temperature 600 °C |
14900 psi @Strain 0.200 %, Temperature 1110 °F |
EN min.; EN 10002-5 |
Outokumpu 4878 High Temperature Austenitic Stainless Steel Heat-resistant variant of 1.4541, with a slightly higher max carbon content. Recommended max service temperature for this steel in dry air is 800°C. Applications: Heat and creep resistance. For .. |
|||
Tensile Strength, Yield | 103 MPa @Thickness 3.17 mm |
15000 psi @Thickness 0.125 in |
LW |
Industrial Laminates/Norplex NP631 Paper Base Laminate Description: Hot punching grade with excellent electrical properties and low moisture absorption.Thickness Tested: 0.062", 0.125" and 0.500" |
|||
Tensile Strength, Yield | 103 MPa @Thickness 1.57 mm |
15000 psi @Thickness 0.0620 in |
CW; ASTM D638 |
Industrial Laminates/Norplex NP843 Paper Base Laminate Description: Paper reinforced phenolic grade with controlled conductivity. Mechanical strength similar to NP611. NP843 has conductive surfaces only, as compared to NP842, which is conductive through.. |
|||
Tensile Strength, Yield | 103 MPa @Strain 10.0 % |
14900 psi @Strain 10.0 % |
ASTM D95 |
Daelim H&L Plavis MS Aromatic Polyimide, 15% MoS2 Filled, Machined Parts Available in vacuum or non-lubrication condition, very high abrasion resistance and low friction coefficient propertyInformation provided by Daelim H&L |